SN-H.S.G

SN-H.S.G is a vegetable oil-based main bearing seal grease (excluder grease) developed for shielded Tunnel Boring Machines (TBMs). Designed to help protect the main bearing sealing system against the ingress of groundwater, soil, and dust, it combines water resistance, strong adhesion, and pumpability for demanding underground excavation conditions.

For technical specifications, project suitability assessment, and commercial quotations for SN-H.S.G, contact SiNDA through WhatsApp.

TBM Seal Grease
Water Resistance
TBM Main Bearings
QR Code
Scan the QR to continue on your phone

Product Overview

SN-H.S.G is a specialized main bearing seal grease, also known as excluder grease, designed for shielded Tunnel Boring Machines (TBMs). Its primary function is to establish a sealing barrier that helps prevent water, soil, and dust from entering the main bearing area during underground excavation.

Unlike general-purpose lubricating greases, SN-H.S.G is specifically intended for TBM main bearing sealing applications where resistance to water and ground pressure, material adhesion, and grease delivery performance are important. Its formulation contains vegetable oil, special fillers, and additives, producing a black paste designed to provide sealing and lubricating functions within the designated TBM sealing arrangement.

The vegetable oil-based formulation is particularly relevant to tunneling projects that consider the environmental characteristics of materials used underground. Its performance should nevertheless be evaluated against the sealing system requirements and operating conditions of the specific TBM.

Operational Applications

Main Bearing Protection in Shielded TBMs

The principal application of this product is the main bearing sealing arrangement of shielded tunneling machines.

During excavation, groundwater, soil particles, and fine debris may be present around the cutterhead and bearing sealing system. This product helps establish a protective barrier against the ingress of these materials, supporting the integrity of the bearing sealing arrangement.

Excluder Grease Injection Systems

SN-H.S.G is designed for use in TBM grease pumping and distribution systems. Its pumpability allows the material to be delivered through the sealing arrangement while its adhesive properties help maintain the grease barrier at the application point.

This combination is important because a sealing grease must both reach the required location and remain effective once applied.

Tunneling Under Water and Ground Pressure

Excavation projects involving groundwater and significant ground pressure place additional demands on the sealing system.

This product is formulated to resist water and ground pressure and has passed a Matsumura Sealing Test conducted at 34 bar. This provides a documented test reference for technical evaluation, although it should not be interpreted as a universal maximum operating pressure rating for every TBM installation.

Technical Specifications

The following properties are reported in the technical datasheet and supporting safety documentation.

Property Test Method / Condition Specification
Product Type — Main Bearing Seal Grease (Excluder Grease)
Base Oil Type — Vegetable Oil
Appearance — Black Paste
Worked Penetration ASTM D217, 60 Dh (as stated in TDS) 250–270 (0.1 mm)
Dropping Point ASTM D566 None (as reported in TDS)
Density At 20°C Approx. 1.20 g/cm³ (MSDS)
Water Solubility — Insoluble (TDS)
Water Washout ASTM D1264 <5%
Matsumura Sealing Test 34 bar Pass
Flash Point ASTM D92 >280°C (TDS; pending reconciliation)
Minimum Service Temperature — +10°C
Storage Temperature — +5°C to +40°C
Colour — Black

These values provide a basis for preliminary technical evaluation of SN-H.S.G. Final product selection should consider the TBM manufacturer’s specifications, main bearing sealing system design, grease injection equipment, anticipated groundwater and ground pressure, and actual operating conditions.

Performance Characteristics

Water Resistance and Sealing Integrity

SN-H.S.G exhibits strong resistance to water exposure, with a reported water washout result below 5% under ASTM D1264.

This characteristic is relevant to underground excavation where the grease barrier may be exposed to groundwater.

For engineering evaluation, the washout result should be considered alongside the documented sealing test and the actual pressure conditions at the main bearing.

Pumpability and Adhesion

This product is described in its technical datasheet as having excellent pumpability and adhesion. These characteristics are important for delivering excluder grease through TBM injection systems and supporting the formation of a sealing barrier at the application point. Actual pumping performance should be assessed against the injection equipment, grease delivery lines, operating temperature, and system-specific requirements.

Reliable pumping is particularly important for equipment that requires continuous or controlled grease injections.

For example, a TBM operating under variable penetration rates may experience changing grease consumption requirements. The injection system must remain capable of delivering the required material without restricting flow.

High-Pressure Sealing Performance

SN-H.S.G has achieved a passing result in the Matsumura Sealing Test at a reported test pressure of 34 bar, as documented in its technical datasheet. This result provides a reference point for assessing the product’s sealing performance under the specified test conditions.

For project qualification, engineering teams should compare this result with the TBM’s sealing arrangement, anticipated groundwater and ground pressure, grease injection configuration, and equipment manufacturer requirements. The 34 bar test condition should not be treated as a certified maximum working pressure for the complete TBM sealing system.

Vegetable Oil-Based Composition

SN-H.S.G is manufactured using a vegetable oil-based formulation. Its technical documentation identifies the base oil as biodegradable, which may be relevant to tunneling projects that evaluate the environmental characteristics of consumable materials.

However, the available TDS and MSDS do not provide a verified biodegradation percentage or an independent environmental certification for the complete grease. Environmental suitability should therefore be assessed using the available documentation and the applicable project requirements.

Compatibility and Operating Limitations

SN-H.S.G is specifically intended for TBM main bearing sealing systems and should not be considered interchangeable with general-purpose lubricating greases. Product suitability depends on the TBM sealing system design, grease injection arrangement, operating conditions, and the technical requirements specified by the equipment manufacturer.

The technical datasheet specifies a minimum service temperature of +10°C but does not provide a maximum service temperature. Suitability for operation below +10°C or at elevated temperatures should be confirmed through project-specific technical evaluation before use.

For storage, this product should be kept in tightly closed, properly labeled containers at temperatures between +5°C and +40°C, protected from direct sunlight and extreme temperatures.

According to the MSDS, mild steel and high-density polyethylene (HDPE) are recommended materials for containers and container linings, while PVC is identified as unsuitable for these purposes.

Contact with strong oxidizing agents should be avoided. Handling procedures, ventilation, and personal protective equipment should be selected according to the operating environment and applicable industrial safety requirements.

Selection Guidance for TBM Projects

Choosing a suitable main bearing seal grease requires more than comparing general lubrication properties. The product must match the operating demands of the machine and its sealing arrangement.

Before specifying SN-H.S.G, procurement and engineering teams should evaluate:

  • TBM sealing system design: Confirm compatibility with the main bearing sealing arrangement and injection equipment.
  • Groundwater and ground pressure: Compare expected operating conditions with documented sealing test data.
  • Pumping requirements: Review the equipment’s grease delivery system and required injection characteristics.
  • Service temperature: Confirm that operating temperatures remain within the supported range.
  • Grease consumption: Consider cutterhead speed, penetration rate, sealing gap dimensions, and actual tunneling conditions.

The product datasheet identifies cutterhead speed, TBM penetration rate, and sealing gap design as factors affecting grease consumption. Therefore, a fixed consumption rate should not be assumed for every project.

For example, two TBMs using the same sealing grease may have different consumption requirements because of differences in machine design, excavation conditions, and operating parameters.

Safety, Handling, and Technical Documentation

According to its MSDS, SN-H.S.G does not meet the stated GHS hazard classification criteria for physical, health, or environmental hazards based on the available data.

Nevertheless, standard industrial precautions remain necessary. Prolonged skin contact should be avoided, grease spills should be contained, and used material should be disposed of according to applicable regulations.

The MSDS also identifies high-pressure injection injuries as a serious hazard requiring immediate medical attention.

For technical procurement, the TDS and MSDS should be reviewed together to distinguish product performance characteristics from handling and safety requirements.

Industrial FAQ

What is SN-H.S.G used for?

This product is used as a main bearing seal grease in shielded Tunnel Boring Machines. It helps protect the bearing sealing area from water, soil, and dust ingress during excavation.

Is it suitable for high-pressure tunneling conditions?

The product is designed to resist water and ground pressure and has passed a Matsumura Sealing Test at 34 bar. Suitability for a particular tunneling project must still be verified against the TBM sealing system and actual operating pressures.

Can it be used in automatic grease pumping systems?

The product is described as having excellent pumping properties and is intended for TBM sealing grease delivery systems. Equipment-specific compatibility should be confirmed before procurement.

What determines consumption?

Consumption depends on operating and design factors, including cutterhead speed, penetration rate, sealing gap, and tunneling conditions. A project-specific consumption assessment is recommended.

Is it biodegradable?

This product contains vegetable oil, and its technical documentation describes the base oil as biodegradable. A verified biodegradation classification for the complete formulation is not specified in the available documentation.

Show full description

Final Technical Summary

SN-H.S.G is a vegetable oil-based excluder grease developed for the main bearing sealing systems of shielded Tunnel Boring Machines. Its documented characteristics include water washout below 5% under ASTM D1264, worked penetration of 250–270 (0.1 mm), and a passing Matsumura Sealing Test result at 34 bar.

For TBM contractors, tunneling operators, and industrial procurement teams, product selection should account for the sealing system design, anticipated groundwater and ground pressure, injection equipment compatibility, service temperature, and project-specific grease consumption requirements.

SiNDA Oil Trading LLC welcomes technical and commercial enquiries for SN-H.S.G. Contact our team via WhatsApp at +971 56 154 4177 to discuss project requirements, available technical documentation, order quantities, and quotation details.

For direct and secure purchases with guaranteed quality, contact our experts now and benefit from free consultation.