SN-T.S.G Tail Seal Grease

SN-T.S.G is a vegetable oil-based tail seal grease formulated for shielded tunnel boring machines (TBMs). It is designed to help seal the interface between the shield tail and precast concrete lining segments, limiting the ingress of pressurized water, soil and dust. Its combination of water resistance, adhesion and pumpability supports effective tail sealing and delivery through compatible grease injection systems.

Looking for SN-T.S.G tail seal grease for your tunneling project? Contact SiNDA via WhatsApp to request a quotation, discuss technical specifications and confirm supply requirements for your TBM operation.

TBM Tail Seal Grease
Water Resistance & Adhesion
TBM Tail Sealing
QR Code
Scan the QR to continue on your phone

Product Overview

SN-T.S.G is a driving-grade tail sealing grease formulated for use in shielded tunnel boring machines. It is manufactured using vegetable-based oil, special fillers and additives to provide sealing performance, adhesion and pumpability under demanding tunnel construction conditions.

During shield tunneling, the interface between the machine’s shield tail and the installed concrete segments must remain effectively sealed. Without an adequate sealing barrier, groundwater, soil particles and other materials may penetrate the tail area, potentially disrupting tunneling operations.

SN-T.S.G is designed to help maintain this barrier by combining strong adhesion with resistance to water and ground pressure. Its pumping characteristics support delivery through the machine’s sealing system without clogging under the intended operating conditions.

The product also incorporates a biodegradable vegetable-based oil component, making its formulation relevant to projects where material composition and environmental considerations form part of the procurement assessment.

Operational Applications

SN-T.S.G is intended for tail sealing systems in shielded tunnel boring machines, particularly applications where the machine must maintain separation between the excavated ground and the installed tunnel lining.

Its primary applications include:

  • Shield tail sealing: Filling the sealing interface between the shield tail and concrete segments to limit the ingress of water, soil and dust.
  • Pressurized groundwater conditions: Supporting the tail sealing barrier where water pressure creates a risk of leakage into the machine.
  • Ground-pressure exposure: Maintaining a cohesive sealing material at the tail interface under the pressures encountered during shield tunneling.
  • Automated grease injection systems: Supplying tail seal grease through pumping and distribution equipment where consistent material flow is essential.

For tunnel projects with challenging groundwater conditions, the selection process should consider not only the grease’s sealing characteristics but also its compatibility with the installed brushes, injection equipment and operating pressures.

Technical Specifications

The following specifications are based on the Technical Data Sheet (TDS).

Property Test Method / Condition Specification
Product Type — Tail Seal Grease
Base Oil Type — Vegetable Oil
Worked Penetration ASTM D217, 60 strokes 200–230 (0.1 mm)
Density At 20°C 1.35 ± 0.05 kg/L
Dropping Point ASTM D566 None (as stated in TDS)
Water Solubility — Insoluble
Water Washout ASTM D1264 <5% by mass
Matsumura Sealing Test At 34 bar Pass
Flash Point ASTM D92 >280°C
Minimum Service Temperature — +10°C
Storage Temperature — +5°C to +40°C
Colour — Light Cream
Indicative Grease Consumption — Approx. 0.7–1.2 kg/m²

The specifications above are reported in the TDS. The indicated consumption range may vary depending on segment ring surface conditions, tunnel curvature, tail seal brush condition, grouting pressure, and slurry pressure. Product suitability should be confirmed against the TBM manufacturer’s requirements and actual project operating conditions.

Performance Characteristics

Water Resistance and Sealing Performance

SN-T.S.G has a reported water washout result of less than 5% under ASTM D1264 and passes the Matsumura Sealing Test at 34 bar.

The reported water washout result of less than 5% under ASTM D1264 indicates resistance to water-induced grease removal under the specified test conditions. Together with a passing Matsumura Sealing Test at 34 bar, this supports the product’s intended application in water-exposed TBM tail sealing systems. Actual sealing performance depends on the tail seal assembly, brush condition, injection parameters and site operating pressures.

The 34-bar laboratory test result must not be treated as the maximum operating pressure rating of the complete TBM tail sealing system.

Adhesion and Sealing Retention

SN-T.S.G is formulated with strong adhesive properties to support grease retention around the shield tail brushes and concrete lining segments as the TBM advances. For effective operation, this adhesion must be balanced with sufficient pumpability to allow the grease to reach and replenish the sealing interface through the machine’s injection system.

Pumpability and Injection-System Performance

SN-T.S.G is designed to provide good pumpability for the delivery of tail seal grease through compatible TBM injection systems. Its worked penetration of 200–230 (0.1 mm), measured according to ASTM D217, provides a consistency specification for technical evaluation.

Pumping suitability should be assessed against the machine’s injection pressure, delivery line dimensions, pumping distance and grease system requirements. The stated penetration range alone does not establish compatibility with every TBM grease pump or distribution system.

Vegetable-Based Formulation

SN-T.S.G is formulated with vegetable oil, special fillers and additives. The product documentation identifies the vegetable-based oil component as biodegradable, making the formulation relevant to tunneling projects that include material composition and environmental requirements in their procurement criteria.

Biodegradability and environmental acceptability of the complete grease formulation should be assessed against the specific test results, certifications and regulatory requirements applicable to the project. The biodegradability of the base oil alone does not establish the biodegradation performance of the finished grease.

Compatibility and Operating Limitations

Before specifying SN-T.S.G for a tunneling project, verify that its technical characteristics meet the requirements of the TBM tail seal system.

Key considerations include the following:

  • Service temperature: The stated minimum service temperature is +10°C. Applications below this temperature require further technical assessment.
  • Pump compatibility: Injection pressure, pipe dimensions, pumping distance and equipment requirements should be reviewed before use.
  • Sealing conditions: The expected groundwater pressure, grouting pressure, tail seal brush condition and concrete segment geometry can affect sealing performance.
  • Material compatibility: Compatibility with existing grease, seals and other system components should be confirmed before a changeover.
  • Storage conditions: Store between +5°C and +40°C in properly closed, labelled containers, away from temperature extremes and direct sunlight.

The MSDS identifies mild steel and high-density polyethylene as recommended container materials and PVC as unsuitable for containers or their linings.

For procurement and site preparation, confirm that the proposed storage arrangements, grease injection equipment and operating temperatures comply with the product documentation and the TBM manufacturer’s requirements. Particular attention should be given to storage conditions during transport, especially when material may be exposed to temperatures outside the specified +5°C to +40°C range.

Selection Guidance and Consumption Planning

The SN-T.S.G Technical Data Sheet states an indicative consumption rate of approximately 0.7–1.2 kg/m². Actual grease consumption may vary depending on segment ring surface conditions, tunnel curvature, tail seal brush condition, grouting pressure and slurry pressure.

For procurement planning, contractors should confirm the applicable area basis for the stated consumption rate and calculate material requirements using the project’s TBM configuration, expected advance conditions and available site consumption records.

The indicated consumption range is a planning reference rather than a guaranteed usage rate. Final quantities should be reviewed against actual injection-system performance and operating conditions.

Compliance, Safety and Handling

According to the supplied MSDS, SN-T.S.G does not meet the stated GHS classification criteria for physical, health or environmental hazards based on the available data. The MSDS also identifies the product as not classified as a dangerous good for transport.

These classifications do not remove the need for appropriate industrial handling procedures. Personnel should avoid prolonged skin contact, use suitable protective equipment and prevent the release of grease into drains, surface water or soil. Accidental high-pressure injection beneath the skin requires immediate medical attention, even when no visible injury is apparent.

Project-specific safety, environmental and regulatory requirements should be verified separately before product approval or use.

Frequently Asked Questions

What is SN-T.S.G used for?

It is a tail seal grease designed for shielded tunnel boring machines. It helps seal the gap between the shield tail and concrete segments to reduce the ingress of water, soil and dust.

Is this product suitable for pressurized groundwater conditions?

The product is designed to resist water and ground pressure and passes the Matsumura Sealing Test at 34 bar. Suitability for a particular groundwater pressure must still be assessed against the complete TBM sealing system and operating conditions.

What is the typical consumption of this product?

The TDS specifies an indicative consumption of approximately 0.7–1.2 kg/m². Actual consumption varies with tunnel geometry, brush condition, segment surfaces and operating pressures.

Does it contain biodegradable components?

Yes. It is formulated with vegetable-based oil, which the product documentation identifies as biodegradable. However, the supplied documents do not provide a specific biodegradability test result or certification for the complete grease formulation. Project-specific environmental compliance should therefore be verified separately.

What is the minimum operating temperature?

The stated minimum service temperature is +10°C. This should not be confused with its storage temperature range of +5°C to +40°C.

Can this product be used in any TBM grease injection system?

Compatibility should be checked against the machine manufacturer’s requirements, particularly pumping pressure, delivery arrangement, material consistency and tail seal design.

Show full description

Final Technical Summary

SN-T.S.G is a vegetable oil-based tail seal grease developed for shielded tunnel boring machines requiring effective sealing against water and ground ingress, strong adhesion and reliable grease delivery.

Its documented technical characteristics include a worked penetration of 200–230 (0.1 mm), water washout below 5%, a passing Matsumura Sealing Test at 34 bar and indicative consumption of 0.7–1.2 kg/m².

For product evaluation, procurement planning or bulk supply enquiries, contact SiNDA to discuss your TBM specifications, project operating conditions and quotation requirements.

For direct and secure purchases with guaranteed quality, contact our experts now and benefit from free consultation.