SN-MP3 100
SN-MP3 100 is a mineral oil-based, lithium soap-thickened multipurpose grease formulated for industrial and automotive lubrication applications requiring a relatively firm NLGI 3 consistency. It contains anti-wear, antioxidant, and corrosion-inhibiting additives and is specified for an operating temperature range of -20°C to +130°C. Typical applications include selected bearing arrangements, wheel bearings, agricultural equipment, and vertical-shaft lubrication points, subject to equipment manufacturer requirements.
Request technical information, product availability, and a commercial quotation from SiNDA via WhatsApp.
- Product Type
- Key Performance
- Application
- Open this page on mobile
Product Overview
SN-MP3 100 combines a mineral base oil with a lithium soap thickener to provide a multipurpose grease with NLGI 3 consistency. Its base oil has a kinematic viscosity of 100 mm²/s at 40°C, while the formulation includes additives intended to support wear protection, oxidation resistance, and corrosion protection.
According to the Technical Data Sheet (TDS), the grease offers good mechanical stability and is suitable for operation within a specified temperature range of -20°C to +130°C. These characteristics make it a candidate for selected industrial and automotive lubrication points where the equipment specification permits this grease type.
NLGI 3 indicates a firmer grease consistency than NLGI 2. This may be appropriate for certain bearing arrangements and vertical-shaft applications, but consistency alone does not determine lubrication suitability. Bearing speed, operating temperature, grease delivery method, base oil viscosity, and manufacturer requirements must also be considered.
Typical Applications
The product TDS identifies the following applications:
- Electric motor bearings: For motor bearing arrangements where NLGI 3 grease is permitted by the equipment manufacturer.
- Automotive wheel bearings: For selected car, truck, and trailer wheel-bearing applications requiring the specified grease characteristics.
- Agricultural equipment: For compatible lubrication points in agricultural machinery.
- Water pump bearings: Where the pump manufacturer’s lubrication specification permits this grease type and consistency.
- Vertical shaft applications: Where the equipment design calls for a relatively stiff grease.
- Propeller shafts: For suitable shaft lubrication points, subject to equipment-specific requirements.
- High ambient temperature conditions: For suitable lubrication points exposed to elevated ambient temperatures, provided that actual grease operating temperatures remain within the specified -20°C to +130°C range and equipment requirements are satisfied.
For example, a maintenance team evaluating grease for a vertical-shaft bearing should check the manufacturer’s required consistency, operating speed, bearing temperature, and relubrication method before selecting this product.
Technical Specifications
| Property | Test Method | Typical Value |
| Product Designation | — | SN-MP3 100 |
| Grease Type | — | Multipurpose Lithium Grease |
| Base Oil Type | — | Mineral Oil |
| Base Oil Viscosity at 40°C | ASTM D445 | 100 mm²/s (cSt) |
| Thickener Type | — | Lithium Soap |
| NLGI Consistency Grade | — | 3 |
| Worked Penetration (60 Double Strokes) | ASTM D217 | 220–250 (0.1 mm) |
| Dropping Point | ASTM D566 | >185°C |
| Operating Temperature Range | — | -20°C to +130°C |
| Color | — | Yellow to Light Brown |
Values are based on the supplied Technical Data Sheet (TDS) and represent typical product characteristics rather than guaranteed performance specifications.
Performance Characteristics
Wear and Corrosion Protection
SN-MP3 100 contains anti-wear and anti-corrosion additives intended to help protect lubricated components during operation. The TDS identifies wear and corrosion protection among the product’s performance characteristics, making these properties relevant to its intended industrial and automotive applications.
However, the supplied documentation does not provide quantitative results for four-ball wear testing, weld load, or other extreme-pressure (EP) performance measurements. Therefore, no specific EP performance rating should be assumed from the available data.
For machinery operating under severe shock loads, unusually high contact pressures, or applications requiring a defined EP performance level, additional technical verification is recommended before selecting this product.
Oxidation and Mechanical Stability
The TDS identifies good oxidation stability and mechanical stability as product features.
Oxidation resistance is relevant because lubricant degradation can affect grease conditions during service. Mechanical stability is also important where repeated working and movement may change grease consistency.
These characteristics support consideration of SN-MP3 100 for suitable bearing applications, but they do not establish a universal relubrication interval. Maintenance schedules must account for operating temperature, bearing speed, contamination, and equipment manufacturer guidance.
Temperature Performance
The stated operating range is -20°C to +130°C, with a dropping point above 185°C.
These figures describe different properties. The dropping point is a laboratory characteristic and must not be interpreted as the maximum continuous operating temperature.
Applications approaching the upper operating limit require particular attention to bearing temperature, relubrication frequency, and the equipment manufacturer’s instructions.
How to Select
Before specifying this product, technical buyers and maintenance engineers should verify the following conditions.
Grease consistency: Confirm that the lubrication point accepts NLGI 3 grease. Some centralized lubrication systems and small delivery passages may require softer products.
Base oil viscosity: Check whether 100 mm²/s at 40°C is appropriate for the bearing design, rotational speed, operating temperature, and load.
Operating temperature: Ensure that the expected service temperature remains within the stated -20°C to +130°C range.
Existing lubricant compatibility: Identify the grease currently in use before changing products. Compatibility cannot be established from the lithium thickener designation alone.
OEM requirements: Review any required approvals, performance classifications, or manufacturer-specific grease specifications.
For example, replacing an NLGI 2 grease with SN-MP3 100 solely because both products use lithium-based thickeners would be insufficient justification. The difference in consistency may affect grease delivery and equipment operation.
Compatibility and Application Limitations
This product should not be treated as a universal replacement for every industrial or automotive grease.
The Technical Data Sheet lists SKF LGMT 3 and Shell Gadus S2 V100 3 as equivalent products. This is a product comparison stated in the supplied TDS and should not be interpreted as evidence of formal approval, manufacturer endorsement, or guaranteed interchangeability. Before replacing an existing grease, maintenance engineers should compare the relevant technical properties, equipment requirements, operating conditions, and compatibility.
The available documentation does not establish food-grade certification, NSF registration, a specific extreme-pressure classification, or suitability for every high-speed bearing.
Likewise, negligible water solubility, as reported in the Safety Data Sheet (SDS), should not be interpreted as a measured water-washout resistance rating.
For storage, the SDS specifies closed containers in a cool, ventilated area at 0°C to 50°C. It identifies mild steel and high-density polyethylene as recommended container materials and PVC as unsuitable for containers or linings.
Safety, Handling, and Documentation
SN-MP3 100 is a semi-solid mineral oil-based grease. The SDS reports a flash point above 200°C and states that the product is not classified as dangerous goods for transport.
Normal industrial handling precautions remain necessary. Avoid prolonged skin contact, protect the eyes from splashes, and prevent uncontrolled release into drains or waterways.
The SDS also identifies possible serious eye irritation and advises appropriate protective equipment based on workplace exposure conditions.
These handling requirements should be reviewed by procurement, warehouse, and maintenance personnel before the product is introduced into service.
Frequently Asked Questions
What is SN-MP3 100?
SN-MP3 100 is a mineral oil-based multipurpose lithium grease with anti-wear, antioxidant, and anti-corrosion additives. It has an NLGI 3 consistency grade.
What is the operating temperature range?
The product TDS specifies an operating temperature range of -20°C to +130°C. Actual suitability depends on the equipment and service conditions.
Is this product suitable for electric motor bearings?
Electric motor bearings are listed among its typical applications. Selection must still comply with the motor manufacturer’s requirements for grease consistency, base oil viscosity, and operating conditions.
Can this product replace SKF LGMT 3 or Shell Gadus S2 V100 3?
The TDS lists SKF LGMT 3 and Shell Gadus S2 V100 3 as equivalent products. However, this statement does not establish official approval or guarantee direct interchangeability. Any replacement should be evaluated against the equipment manufacturer’s lubrication requirements, operating conditions, and relevant technical specifications.
Is this product suitable for centralized lubrication systems?
Suitability has not been established by the supplied documentation. The NLGI 3 consistency should be checked against the lubrication system’s pumpability and delivery requirements.
Where can industrial buyers request a quotation?
Buyers and distributors in Africa and West Asia can contact SiNDA to discuss technical documentation, availability, packaging options, and commercial quotations.
Technical Summary
SN-MP3 100 is a multipurpose lithium grease combining mineral base oil, NLGI 3 consistency, and anti-wear, antioxidant, and corrosion-inhibiting additives. Its documented properties make it a candidate for selected industrial and automotive bearing applications, including electric motors, wheel bearings, agricultural machinery, and vertical-shaft equipment.
The correct purchasing decision depends on confirming the required grease consistency, base oil viscosity, operating temperature, and equipment specifications.
For product selection assistance, availability, and quotations, contact SiNDA via WhatsApp.
For direct and secure purchases with guaranteed quality, contact our experts now and benefit from free consultation.