SN-CVJ-LCX
SN-CVJ-LCX is a mineral oil-based, lithium calcium complex grease formulated with molybdenum disulphide (MoS₂) for constant velocity joints and selected heavy-duty industrial lubrication applications. With a specified operating temperature range of −25°C to +180°C and a four-ball weld load of 315 kgf, it is designed for lubrication points exposed to high contact pressures, vibration, shock loads, moisture and elevated temperatures.
Contact SiNDA Oil Trading LLC via WhatsApp to discuss availability, suitable NLGI grades and bulk purchasing requirements.
- Product Type
- Key Performance
- Application
- Open this page on mobile
Product Overview
SN-CVJ-LCX is a specialty grease combining mineral base oil, lithium calcium complex thickener technology, performance additives and molybdenum disulphide.
SN-CVJ-LCX is intended for lubrication points exposed to high unit pressures, intermittent shock loads, mechanical vibration, moisture and temperature variation. Its technical datasheet identifies MoS₂ as a formulation component, while the lithium calcium complex thickener system is used to support grease consistency and performance under demanding lubrication conditions. Actual suitability depends on the equipment design, operating conditions and manufacturer requirements.
The product is available in NLGI 1.5 and NLGI 2 consistencies. Both grades share the same specified base oil viscosity, dropping point, four-ball weld load and operating temperature range, with differences in worked penetration and water washout results.
Operational Applications
This product is recommended for constant velocity joints and a range of heavy-duty industrial lubrication applications.
Typical applications include:
- Constant velocity joints: Lubrication of components subjected to changing joint angles, contact loading and movement.
- Heavy-duty bearings: Lubrication points exposed to mechanical loading and vibration, subject to equipment compatibility.
- Construction equipment: Loaders, excavators and cranes operating under challenging mechanical conditions.
- Stone crushers and conveyors: Equipment involving shock loads, vibration and demanding operating environments.
- Pellet mills: Industrial machinery requiring grease selection based on pressure, temperature and lubrication-system requirements.
- Steel and mining equipment: Applications exposed to heavy loads and demanding service conditions.
- Pulp and paper machinery: Selected industrial lubrication points where moisture exposure and operational stresses must be considered.
Suitability for a particular component should be confirmed against its OEM lubrication requirements rather than assumed from the industry or equipment type alone.
Technical Specifications
The following typical technical properties are provided in the product data sheet.
| Property | Test Method | SN-CVJ-LCX 1.5 | SN-CVJ-LCX 2 |
| Base Oil Type | — | Mineral Oil | Mineral Oil |
| Base Oil Viscosity at 40°C | ASTM D445 | 220 cSt | 220 cSt |
| Thickener Type | — | Lithium Calcium Complex | Lithium Calcium Complex |
| Dropping Point | ASTM D566 | 300°C | 300°C |
| NLGI Consistency | — | 1.5 | 2 |
| Worked Penetration | ASTM D217 | 285–320 (0.1 mm) | 265–295 (0.1 mm) |
| Four-Ball Weld Load | ASTM D2596 | 315 kgf | 315 kgf |
| Water Washout, 1 Hour at 40°C | ASTM D1264 | 1% | 0.5% |
| Operating Temperature Range | — | −25°C to +180°C | −25°C to +180°C |
| Colour | — | Black | Black |
The 300°C dropping point is a laboratory property and must not be interpreted as the grease’s permissible operating temperature. The stated upper operating limit is +180°C.
Performance Characteristics
Extreme Pressure and Wear Protection
SN-CVJ-LCX has a specified four-ball weld load of 315 kgf under ASTM D2596, providing a laboratory indicator of extreme-pressure performance under defined test conditions. The product’s MoS₂-containing formulation, as described in the technical datasheet, is intended for lubrication applications involving concentrated loading, shock and vibration.
However, the four-ball result alone does not establish suitability for every bearing design or duty cycle. Contact geometry, operating speed and equipment requirements remain important selection factors.
High-Temperature Stability
This product is specified for operations up to +180°C and has a dropping point of 300°C. The product datasheet also identifies oxidation resistance, corrosion protection and mechanical stability among its performance characteristics.
These characteristics are relevant when evaluating grease for high-temperature and mechanically demanding lubrication applications. However, the technical datasheet does not establish application-specific service life or relubrication intervals. Maintenance schedules should therefore be determined according to equipment requirements, operating temperatures, loading conditions and the manufacturer’s recommendations.
Resistance to Water Washout
Both grades are formulated for applications where moisture is present. At 40°C, the specified water washout values are 1% for NLGI 1.5 and 0.5% for NLGI 2.
Under this particular test condition, the NLGI 2 grade exhibits lower washout loss. These results should not be treated as a guarantee of equivalent performance under high-pressure water jets, prolonged immersion or other untested conditions.
Compatibility and Operating Limitations
This product should be selected regarding equipment requirements, operating temperature, sealing arrangements and existing lubricant chemistry.
Important considerations include:
- The specified operating temperature range is −25°C to +180°C; operation outside this range requires separate technical assessment.
- Compatibility with existing greases, other thickener chemistries and specific elastomer seals has not been established in the supplied datasheet.
- Mixing with another grease should not be assumed acceptable without compatibility verification.
- The MSDS recommends storage between 0°C and 50°C, in tightly closed containers in a cool, ventilated location.
- Strong oxidizing agents, direct sunlight and extreme storage temperatures should be avoided.
The MSDS identifies mild steel and high-density polyethylene as suitable container materials and lists PVC as unsuitable for containers or linings.
Selecting Between Two Grades
The principal documented distinction between the two grades is consistency.
SN-CVJ-LCX 1.5 has a specified worked penetration range of 285–320 (0.1 mm), measured according to ASTM D217. It represents the softer consistency grade overall, although its specified penetration range partially overlaps with that of SN-CVJ-LCX 2. It may be considered where the equipment manufacturer permits this consistency grade.
SN-CVJ-LCX 2 has a worked penetration of 265–295 (0.1 mm) and a lower reported water washout value under ASTM D1264 conditions. It is an option for equipment requiring NLGI 2 consistency.
For example, a maintenance team choosing grease for an excavator lubrication point should first verify the equipment manufacturer’s specified consistency, operating temperature and lubrication requirements. Where NLGI 2 is required, SN-CVJ-LCX 2 may be considered; the machine type alone is not sufficient to establish suitability.
Compliance, Handling and Safety
The supporting documentation identifies ASTM D445, ASTM D566, ASTM D217, ASTM D2596 and ASTM D1264 as test methods used for the reported properties. These methods describe individual laboratory measurements and do not constitute an overall product certification.
According to the MSDS supplied, this product is not classified as a dangerous good for transport. The document also identifies eye irritation as a potential health concern and recommends measures to limit skin and eye exposure. Buyers and industrial users should refer to the latest verified safety documentation for applicable hazard classification, personal protective equipment and handling requirements.
Appropriate industrial hygiene practices should therefore be followed, including avoiding prolonged skin contact, using suitable protective equipment and preventing environmental release.
Industrial FAQ
What is SN-CVJ-LCX primarily used for?
It is recommended for constant velocity joints and selected heavy-duty industrial applications involving high contact pressures, shock loads, vibration, moisture or elevated temperatures.
Does it contain molybdenum disulphide?
Yes. Its technical datasheet identifies MoS₂ as a formulation component intended to support lubrication under demanding loading conditions.
What is the difference between SN-CVJ-LCX 1.5 and 2?
The main documented differences are NLGI consistency, worked penetration and measured water washout. Both grades have a base oil viscosity of 220 cSt at 40°C, a four-ball weld load of 315 kgf and an operating range of −25°C to +180°C.
Can it be used at 200°C?
No. Its specified operating limit is +180°C. The flash point above 200°C and dropping point of 300°C do not indicate suitability for operation at 200°C.
How can industrial buyers request a quotation?
Buyers in Africa and West Asia can contact SiNDA via WhatsApp at +971 56 154 4177, providing the required NLGI grade, order quantity, intended application and destination country.
Final Technical Summary
SN-CVJ-LCX combines mineral oil, lithium calcium complex thickener technology and MoS₂ in a grease developed for constant velocity joints and demanding industrial lubrication duties. Its documented extreme-pressure performance, temperature range and water washout characteristics provide useful selection data for maintenance teams, industrial distributors and technical procurement departments.
For technical enquiries, grade selection and bulk purchasing requirements, contact SiNDA Oil Trading LLC via WhatsApp at +971 56 154 4177. Provide the required NLGI grade, intended application, order quantity and destination country to request product information, availability details and a quotation.
For direct and secure purchases with guaranteed quality, contact our experts now and benefit from free consultation.