EP ADDITIVES – EXTREME PRESSURE
Match EP chemistry to contact severity, lubricant type and material compatibility, supported by application-relevant testing.
- Open this page on mobile
Extreme pressure additives — Product Routes
We supply extreme pressure additives for lubricant formulations where demanding contact conditions require an appropriate load-carrying component system. Listed routes include Sulfurized Olefin, sulfurized fatty oil, Sulfur–Phosphorus EP and organomolybdenum routes.
These components are selected as part of a complete lubricant. Their chemical family does not establish one common load rating, corrosion behaviour or treat rate across the range.
Use our lubricant additives collection for the wider formulation system. The separate anti-wear additives route addresses related surface-protection requirements without assuming that AW and EP test performance are identical.
Applications and Performance Requirements
EP components are relevant to selected gear, metalworking, grease and other formulations exposed to severe contact conditions. The intended application determines the useful chemistry and test programme.
Where a lubricating film becomes insufficient under demanding contact conditions, an appropriate EP system may help protect the working surfaces. The mechanism and effective operating conditions depend on the chemistry and complete formulation.
For a UAE blender, the first step is to define the target lubricant and failure mode: scuffing, seizure, welding or another specified performance requirement. A broad heavy-load description is not enough to select a component.
Chemistry Selection Guide
| Route | Required comparison | Important limitation |
|---|---|---|
| Sulfurized olefin | Sulfur characteristics and application-test response | Check reactivity and metal compatibility |
| Sulfurized fatty oil | Exact grade, carrier and formulation use | Do not assume equivalence with another sulfurised material |
| Sulfur–phosphorus | Balanced component or system performance | Assess the complete lubricant and elemental constraints |
| Organomolybdenum | Documented function in the target formulation | A family name does not establish universal EP performance |
Compare actual test conditions. A four-ball weld result and an FZG result address different test arrangements and should not be converted into each other or used as universal measures of service capability.
Material-compatibility example
A gear-lubricant trial improves a load test after introducing a sulfurised component. If the equipment contains brass, assess the required corrosion behaviour before accepting the change. A stronger load result does not cancel the material-compatibility requirement.
Metal Compatibility and Formulation Balance
Active-sulfur chemistry can require particular care with copper, brass and other sensitive materials. Establish the actual alloy exposure and the selected grade's corrosion behaviour before approval.
The required formulation may also need corrosion inhibitors, metal deactivators or other complementary components. Their presence does not remove the need to test the finished lubricant under relevant conditions.
Review interactions with anti-wear agents, friction modifiers, antioxidants and the base-oil system. A concentration change should be assessed for the complete balance, rather than assuming that a higher EP treat rate always improves the product.
Compatibility and Limitations
Do not extend a component from metalworking to an enclosed gearbox or another application without formulation evidence. Temperature, materials, contamination and required performance can differ substantially.
The component's commercial name does not establish food-contact acceptance, OEM approval or a finished lubricant's performance classification. Verify any required claim separately.
If an in-service machine shows damage, investigate loading, alignment, contamination and lubricant delivery alongside the oil's formulation. Component addition cannot correct every equipment fault.
Technical Documents and Supply
Send the target lubricant, contact type, materials, base oil, existing package, required tests, sulfur or phosphorus restrictions, quantity and delivery destination.
Request the exact grade's TDS and SDS, relevant sulfur and composition information, and application-specific test guidance. We use that brief to identify the EP route and confirm the offered product and commercial supply terms.
Frequently Asked Questions
Can all sulfurised EP additives be used with brass?
No. Check sulfur reactivity, material exposure and the exact formulation's corrosion performance.
Does one load test prove suitability for every gearbox?
No. Use the tests and acceptance criteria relevant to the actual application.
Request a Technical Quotation
Discuss the target formulation, required function, technical constraints, quantity and destination with SiNDA to request the appropriate component or package route and a supply quotation. Contact us on WhatsApp: +971 56 154 4177.