SN-OGC 1000-2500
SN-OGC 1000-2500 is a high-viscosity, graphite-containing open gear grease designed for industrial equipment operating under heavy loads and demanding conditions. Its calcium sulfonate complex formulation combines strong adhesion, water resistance, and extreme-pressure performance to support reliable lubrication of exposed mechanical components.
For product specifications, grade selection, bulk orders, and availability, contact SiNDA on WhatsApp.
- Product Type
- Key Performance
- Application
- Open this page on mobile
Product Overview
SN-OGC 1000-2500 is a sprayable industrial grease formulated with high-viscosity mineral oil, a calcium sulfonate complex thickener, performance additives, and colloidal graphite.
The formulation is intended for open gear drives where lubricant retention and protection against heavy contact loads are essential. The formulation is developed for open gear drives operating under substantial contact loads, where lubricant adhesion, film formation, and protection against wear are important. The SiNDA technical data sheet highlights thermal and oxidation stability, corrosion protection, and resistance to wear, pitting, and scuffing as key performance characteristics. These properties should be evaluated alongside the published laboratory results and the operating requirements of the equipment.
SN-OGC is designed to combine strong adhesion with spray application capability. According to the supplied technical data sheet, the formulation contains no added asphalt, heavy metals, or solvents. Users should verify dispensing and spray-system compatibility for the selected grade and operating conditions.
This product range includes four grades: 500, 1100, 1500, and 2500. They differ in base oil viscosity at 40°C and minimum operating temperature. Grade selection should consider operating conditions, gear loads, lubrication-system requirements, and manufacturer recommendations.
Industrial Applications
SN-OGC 1000-2500 is intended for industrial lubrication applications where exposed surfaces may experience substantial mechanical loads, elevated temperatures, or environmental contamination.
Rotary Kilns
Rotary kiln open gear drives operate under heavy loads and demanding conditions. SN-OGC combines high-viscosity mineral oil, calcium sulfonate complex thickener, and colloidal graphite for adhesive lubrication. Its specified operating temperature reaches +180°C, subject to grade and equipment requirements.
Ball Mills
Ball mill open gear drives experience high torque and repeated loading. SN-OGC provides adhesive lubrication and protection against wear, pitting, and scuffing. Its reported four-ball weld load of ≥800 kgf and FZG scuffing load stage >12 support technical evaluation, subject to operating conditions.
Wire Ropes
For compatible wire rope lubrication applications, the formulation offers adhesion, water resistance, and corrosion protection. Suitability should be verified against the rope construction, lubrication method, and equipment requirements.
Chains
Industrial chains may require lubrication that remains on moving metal surfaces and provides protection against wear and corrosion. SN-OGC can be evaluated for suitable chain applications, subject to delivery system compatibility and operating conditions.
Technical Specifications
The following properties are taken from the SiNDA technical data sheet.
| Property | Test Method | Grade 500 | Grade 1100 | Grade 1500 | Grade 2500 |
| Base Oil Type | — | Mineral Oil | Mineral Oil | Mineral Oil | Mineral Oil |
| Base Oil Viscosity at 40°C (cSt) | ASTM D445 | 500 | 1100 | 1500 | 2500 |
| Thickener Type | — | Calcium Sulfonate Complex | Calcium Sulfonate Complex | Calcium Sulfonate Complex | Calcium Sulfonate Complex |
| NLGI Consistency | — | 0–00 | 0–00 | 0–00 | 0–00 |
| Dropping Point (°C) | ASTM D2265 | >250 | >250 | >250 | >250 |
| Four-Ball Weld Load (kgf) | ASTM D2596 | ≥800 | ≥800 | ≥800 | ≥800 |
| Four-Ball Wear Test (mm) | ASTM D2266 | <0.55 | <0.55 | <0.55 | <0.55 |
| FZG Scuffing Load Stage | DIN 51354 | >12 | >12 | >12 | >12 |
| Operating Temperature Range (°C) | — | -10 to +180 | -10 to +180 | 0 to +180 | +5 to +180 |
| Colour | Visual | Black | Black | Black | Black |
Values are reported in the supplied technical data sheet. They should be considered alongside equipment operating conditions and manufacturer recommendations.
Performance Characteristics
High Load-Carrying Capacity
SN-OGC is formulated for applications involving substantial mechanical contact loads. Its reported four-ball weld load of at least 800 kgf and FZG scuffing load stage above 12 provide laboratory indicators of load-carrying and anti-scuffing performance.
These values support technical evaluation but do not independently establish suitability for every gear design or operating condition.
Wear, Pitting, and Scuffing Protection
SN-OGC combines high-viscosity mineral oil, a calcium sulfonate complex thickener, performance additives, and colloidal graphite to support lubrication of heavily loaded gear surfaces. The technical data sheet reports a four-ball wear scar diameter below 0.55 mm under ASTM D2266 and an FZG scuffing load stage above 12 under DIN 51354. These results provide useful laboratory indicators of wear and scuffing performance but do not establish complete protection against pitting or other gear failure mechanisms under all service conditions.
Adhesion and Water Resistance
Strong adhesion helps the grease remain on exposed surfaces during operation, while its water-resistant formulation supports use where moisture may affect lubrication.
These characteristics are useful for open-gear drives and other compatible industrial components operating in exposed environments.
High-Temperature Performance
The technical data sheet specifies a maximum operating temperature of +180°C across the product range, with different minimum operating temperatures for individual grades.
The dropping point above 250°C is a separate laboratory property and must not be interpreted as the maximum continuous operating temperature.
Sprayable Consistency
The technical data sheet describes SN-OGC as a sprayable open gear grease and lists an NLGI consistency range of 0–00 for all four grades. This consistency range, together with the product’s stated sprayability, supports its evaluation for industrial spray lubrication systems. Actual pumpability, delivery rate, and spray distribution must be verified for the selected grade, operating temperature, pump capacity, delivery lines, and nozzle configuration.
Compatibility and Operating Limitations
Selecting an open gear grease requires consideration of both the lubricant’s protective properties and the application system.
Operating temperature: The SN-OGC 2500 grade is specified for temperatures from +5°C to +180°C, whereas the 500 and 1100 grades are specified from -10°C to +180°C. This distinction matters for equipment operating in colder environments.
Lubrication delivery: Higher-viscosity grades may place different demands on pumps and spray systems. Verify delivery performance before selecting a grade for centralized lubrication.
Lubricant compatibility: Do not assume the grease can be mixed with an existing lubricant. Confirm compatibility or follow an appropriate changeover procedure.
Application suitability: The published applications do not establish universal suitability for enclosed gearboxes, high-speed bearings, or every type of chain and wire rope.
Storage: The MSDS specifies a storage temperature of 0°C to 50°C. Containers should remain closed and be stored in a cool, well-ventilated location away from direct sunlight and extreme temperatures.
How to Select the Appropriate Grade
The four grades share the same listed thickener type, NLGI consistency, and laboratory load-performance values. Their main documented differences are base oil viscosity and minimum operating temperature.
For equipment where lower ambient temperatures are expected, grade 500 or grade 1100 may be more appropriate candidates for evaluation because both are specified down to -10°C.
Grades 1500 and 2500 provide higher base oil viscosities, but their stated minimum operating temperatures are 0°C and +5°C respectively.
Higher viscosity should not automatically be interpreted as better performance. The correct choice depends on gear speed, load, temperature, lubricant distribution, and equipment manufacturer recommendations.
For example, when evaluating an outdoor ball mill open gear drive exposed to low ambient temperatures, the lubricant temperature during startup and operation should be considered before selecting a grade. SN-OGC 2500 has a specified minimum operating temperature of +5°C, while grades 500 1100 are listed down to -10°C. A grade should not be selected solely on the basis of higher base oil viscosity; its operating temperature range, lubricant distribution, and delivery-system compatibility must also be assessed.
Safety and Handling Information
According to the supplied Material Safety Data Sheet (MSDS), SN-OGC is classified as causing serious eye irritation (H319). Appropriate eye protection and chemical-resistant gloves should be used during handling, and prolonged or repeated skin contact should be avoided. Where the grease is heated, sprayed, or capable of generating airborne mists, suitable ventilation and exposure controls should be assessed.
High-pressure injection injuries require immediate medical attention, even when no visible wound is present. Store the product in tightly closed, properly labelled containers at 0°C to 50°C, away from direct sunlight and extreme temperatures. Prevent release into drains, surface water, and groundwater, and follow the MSDS and applicable local regulations for handling, spill response, and disposal.
Frequently Asked Questions
What is SN-OGC 1000-2500 used for?
It is a sprayable graphite-containing lubricant for open gear drives and other listed industrial applications, including rotary kilns, ball mills, wire ropes, and chains.
Does this product contain graphite?
Yes. The technical data sheet identifies colloidal graphite as part of the formulation, alongside mineral base oil, calcium sulfonate complex thickener, and performance additives.
What is the operating temperature range?
Depending on the grade, this product operates from -10°C to +180°C. Minimum temperatures vary by grade.
Is it suitable for spray lubrication systems?
The technical data sheet describes the grease as sprayable. The selected grade must still be checked against the pump, delivery lines, nozzles, and operating temperature of the actual system.
What is the difference between grades 500, 1100, 1500, and 2500?
The primary documented distinction is base oil viscosity at 40°C: 500, 1100, 1500, and 2500 cSt respectively. The grades also have different minimum operating temperatures.
Final Technical Summary
SN-OGC 1000-2500 is a sprayable, graphite-containing calcium sulfonate complex grease developed for demanding open gear lubrication applications. Its published specifications include high load-carrying performance, water resistance, adhesion, corrosion protection, and grade-dependent operating temperature ranges.
For rotary kilns, ball mills, and other compatible industrial lubrication applications, selecting the appropriate grade requires evaluation of base oil viscosity, operating temperature, gear loading, and lubricant delivery-system requirements. Contact SiNDA to discuss grade selection, technical documentation, product availability, and bulk quotation requirements.
For direct and secure purchases with guaranteed quality, contact our experts now and benefit from free consultation.