OGA-1000-2500 – Sprayable Aluminium Complex Open Gear Grease with Graphite
OGA-1000-2500 is a sprayable aluminium complex open gear grease with colloidal graphite, designed for heavy-duty industrial lubrication requiring strong adhesion, water resistance, and high load-carrying performance.
Contact SiNDA via WhatsApp to request technical specifications, discuss grade selection, and obtain a quotation for OGA-1000-2500.
- Product Type
- Key Performance
- Application
- Open this page on mobile
Product Overview
OGA-1000-2500 is an industrial grease developed for the lubrication of open gear drives exposed to substantial mechanical loads. Its formulation combines high-viscosity mineral base oil with an aluminium complex thickener, performance additives, and colloidal graphite.
This product combines strong adhesion with sprayable consistency to support lubricant retention and distribution across exposed gear tooth surfaces. These characteristics are relevant to open gear lubrication systems where maintaining grease coverage under mechanical loading is an important operational requirement.
According to the technical datasheet, OGA-1000-2500 provides high load-carrying capacity, corrosion protection, water resistance, and protection against wear, pitting, and scuffing. The reported four-ball weld load of ≥800 kgf and FZG scuffing load stage above 12 provide laboratory indicators of load-carrying and scuffing performance under specified test conditions. Actual performance depends on equipment design, operating conditions, and lubrication practices.
The formulation is also specified as free from asphalt, heavy metals, and solvents.
Four grades are available: OGA-500, OGA-1100, OGA-1500, and OGA-2500. They share the same stated NLGI consistency but differ in base oil viscosity and minimum operating temperature.
Industrial Applications
Rotary Kiln Open Gear Drives
Rotary kilns use large gear drive assemblies that operate under sustained mechanical loading. OGA-1000-2500 is formulated to provide adhesive lubrication, helping maintain grease coverage on exposed gear tooth surfaces.
Its high-viscosity base oil and graphite-containing formulation support lubrication under demanding contact conditions. The selected grade must remain within its specified operating temperature range.
Ball Mill Gear Drives
Ball mills transmit substantial torque through gear drive systems, making lubricant film retention and load-carrying performance important selection criteria.
This product provides the documented combination of adhesion, high load-carrying capacity, and protection against wear, pitting, and scuffing. The grease should be evaluated against the equipment manufacturer’s lubrication requirements.
Wire Ropes
OGA-1000-2500 is also listed for wire rope lubrication applications. Its adhesive properties, water resistance, and corrosion protection may support lubricant retention on exposed rope surfaces. Selection should account for rope construction, internal lubrication requirements, operating conditions, and the application method, as surface adhesion alone does not establish adequate penetration into the rope structure.
Industrial Chains
This product can be evaluated for industrial chain lubrication where grease adhesion, corrosion protection, and water resistance are important. Suitability depends on chain design, operating temperature, lubrication access, and whether the application requires lubricant penetration into pins and bushings. Compatibility with the dispensing system and equipment manufacturer’s requirements should be confirmed before use.
Technical Specifications
The following values are taken from the product technical datasheet.
| Property | Test Method | OGA-500 | OGA-1100 | OGA-1500 | OGA-2500 |
| Base Oil Type | — | Mineral Oil | Mineral Oil | Mineral Oil | Mineral Oil |
| Base Oil Viscosity at 40°C (cSt) | ASTM D445 | 500 | 1100 | 1500 | 2500 |
| Thickener Type | — | Aluminium Complex | Aluminium Complex | Aluminium Complex | Aluminium Complex |
| NLGI Consistency | — | 0–00 | 0–00 | 0–00 | 0–00 |
| Dropping Point | ASTM D2265 | >180°C | >180°C | >180°C | >180°C |
| Four-Ball Weld Load | ASTM D2596 | ≥800 kgf | ≥800 kgf | ≥800 kgf | ≥800 kgf |
| Four-Ball Wear Test | ASTM D2266 | <0.6 mm | <0.6 mm | <0.6 mm | <0.6 mm |
| FZG Scuffing Load Stage | DIN 51354 | >12 | >12 | >12 | >12 |
| Operating Temperature Range | — | −10 to +140°C | −10 to +140°C | 0 to +140°C | +5 to +140°C |
| Colour | Visual | Black | Black | Black | Black |
Technical note: Base oil viscosity values are measured at 40°C and do not represent the viscosity of the finished grease. The NLGI consistency is reported as 0–00 in the technical datasheet. The dropping point is a laboratory measurement and must not be interpreted as the maximum continuous operating temperature. Performance values represent reported test results under specified laboratory conditions.
Performance Characteristics
High Load-Carrying Capacity
The reported four-ball weld load of ≥800 kgf provides an indicator of extreme-pressure performance, while the FZG scuffing load stage above 12 provides additional information about resistance to scuffing under specified test conditions. These results support technical evaluation of this product for heavily loaded open gear applications, although actual performance depends on operating conditions, equipment design, and lubricant application.
Adhesion and Sprayability
OGA-1000-2500 combines strong adhesive properties with a sprayable consistency. Spray-system compatibility should nevertheless be confirmed for the selected viscosity grade, equipment, and operating temperature.
Wear and Corrosion Protection
This product is formulated to provide wear and corrosion protection in demanding industrial lubrication applications. The technical datasheet reports a four-ball wear test result below 0.6 mm across all four grades, providing a laboratory indicator of anti-wear performance. Although the manufacturer also identifies protection against pitting and scuffing as product features, these characteristics should be evaluated in relation to the specific gear operating conditions and applicable equipment requirements.
Water Resistance
Water resistance is identified as a product feature, making it relevant for applications where lubricated surfaces may encounter moisture. The technical datasheet does not provide a quantified water-resistance test result.
Grade Selection Guidance
Although all four grades have a reported NLGI consistency of 0–00, their base oil viscosities and lower operating temperature limits differ.
| Grade | Base Oil Viscosity at 40°C | Operating Temperature Range |
| OGA-500 | 500 cSt | −10 to +140°C |
| OGA-1100 | 1,100 cSt | −10 to +140°C |
| OGA-1500 | 1,500 cSt | 0 to +140°C |
| OGA-2500 | 2,500 cSt | +5 to +140°C |
Higher base oil viscosity should not automatically be considered the better choice for every installation. Grade selection should account for the equipment manufacturer’s viscosity recommendations, operating temperature, mechanical loading, and lubrication system requirements. For spray lubrication systems, verify that the selected grade can be effectively pumped, delivered through the installed nozzles, and distributed across the gear tooth surfaces under actual operating conditions.
Compatibility, Limitations and Handling
OGA-1000-2500 has a specified maximum operating temperature of +140°C. It should not be selected for service above that stated limit without additional technical qualification.
The MSDS describes the material as a black, semi-solid paste and reports negligible water solubility, an approximate density of 0.90 g/cm³, and a flash point above 200°C.
For storage, the MSDS specifies a temperature range of 0–50°C and recommends keeping containers tightly closed in a cool, well-ventilated location.
The product is classified as causing serious eye irritation (H319). Appropriate eye protection and protective gloves should be used during handling. Where spraying or heating may generate airborne mist, ventilation and exposure controls should be assessed.
The MSDS identifies mild steel and high-density polyethylene as recommended container materials and PVC as unsuitable for containers or linings.
Before introducing this product into an existing lubrication system, verify compatibility with the grease already in service, seals, delivery lines, pumps, and spray equipment. Compatibility between different grease thickener systems should not be assumed without appropriate assessment. Where the existing lubricant is unknown or incompatible, consult the equipment manufacturer or lubricant supplier regarding suitable changeover procedures.
Frequently Asked Questions
What is OGA-1000-2500 used for?
This product is a sprayable industrial grease intended primarily for open gear drives. The datasheet also lists rotary kilns, ball mills, wire ropes, and industrial chains as typical applications.
What is the difference between OGA-500 and OGA-2500?
OGA-500 has a base oil viscosity of 500 cSt at 40°C and an operating temperature range of −10 to +140°C. OGA-2500 has a base oil viscosity of 2,500 cSt and an operating range of +5 to +140°C. Selection depends on equipment and lubrication-system requirements.
Can it be applied using a spray system?
The technical datasheet identifies this product as sprayable. However, suitability for a particular spray system should be confirmed against the selected grade and equipment operating conditions.
Final Summary
SiNDA supplies OGA-1000-2500 for industrial lubrication requirements in Africa and West Asia. Buyers evaluating this product should specify the required viscosity grade, operating temperature, equipment application, and estimated order quantity.
For other industrial lubrication requirements, explore SiNDA’s grease product range.
Contact SiNDA via WhatsApp to discuss technical requirements, confirm availability, and request a commercial quotation.
For direct and secure purchases with guaranteed quality, contact our experts now and benefit from free consultation.