SN-CSX 462
SN-CSX 462 is an NLGI 2 calcium sulfonate complex grease engineered for heavily loaded bearings operating under heat, vibration and water exposure. Its high-viscosity mineral oil base and robust thickener system make it suitable for demanding steel mill, continuous casting, marine and offshore lubrication applications.
Request technical documentation, product availability and a quotation from SiNDA via WhatsApp for your industrial lubrication requirements.
- Product Type
- Key Performance
- Application
- Open this page on mobile
Product Overview
SN-CSX 462 is a high-viscosity calcium sulfonate complex grease developed for demanding industrial lubrication applications. Combining mineral base oil with calcium sulfonate complex thickener technology, it is intended for equipment exposed to heavy loads, elevated temperatures, vibration and wet operating conditions. Its formulation is particularly relevant to steel mill and marine applications where extreme-pressure performance and water resistance are important selection factors.
With a mineral base oil viscosity of 460 cSt at 40°C and NLGI 2 consistency, SN-CSX 462 is formulated for grease-lubricated components requiring high-viscosity base oil and a semi-solid lubricant structure. Actual lubricant film formation and operating suitability depend on bearing speed, load, temperature and equipment design.
Its specified operating temperature range extends from -20°C to +200°C, while its dropping point exceeds 300°C. These properties support consideration for high-temperature equipment, although actual relubrication intervals and operating suitability depend on bearing conditions, temperature exposure and equipment requirements.
SiNDA supplies this product for industrial buyers seeking a technical solution for demanding bearing lubrication environments.
Operational Applications
This product is particularly relevant to industrial equipment exposed to combinations of heat, load, vibration and water.
Steel Mill Work Roll Bearings
Work roll bearings operate under substantial mechanical loads and demanding production conditions. The grease’s high base oil viscosity, extreme-pressure performance and mechanical stability make it a candidate for these lubrication points, subject to bearing manufacturer requirements.
Continuous Casting Machines
Continuous casting equipment combines elevated temperatures with significant operating loads and potential water exposure. SN-CSX 462 offers high-temperature capability and strong resistance to water washout, making it suitable for evaluation in these environments.
Marine and Offshore Equipment
Marine installations may expose lubricated components to persistent moisture and water ingress. The grease’s calcium sulfonate complex thickener system provides water resistance and corrosion protection characteristics relevant to equipment operating in wet environments.
Sealed Spherical Roller Bearings
The technical data sheet identifies sealed spherical roller bearings operating at temperatures up to 200°C among the intended applications of this product. However, the specified grease temperature range does not establish the temperature limits of the bearing assembly or its seals. Final selection should follow bearing manufacturer recommendations and consider operating speed, load, seal compatibility and actual service temperature.
Technical Specifications
| Property | Test Method | Unit | SN-CSX 462 |
| Base Oil Type | — | — | Mineral Oil |
| Base Oil Viscosity at 40°C | ASTM D445 | cSt (mm²/s) | 460 |
| Thickener Type | — | — | Calcium Sulfonate Complex |
| Dropping Point | ASTM D566 | °C | >300 |
| NLGI Consistency | — | Grade | 2 |
| Worked Penetration, 60 Strokes | ASTM D217 | 0.1 mm | 265–295 |
| Four-Ball Weld Load | ASTM D2596 | kgf | ≥500 |
| Water Washout at 80°C, 1 Hour | ASTM D1264 | wt% | ≤1 |
| Operating Temperature Range | — | °C | -20 to +200 |
| Colour | — | — | Light Brown-Yellow |
Values are taken from the supplied technical data sheet. They should be evaluated alongside application conditions rather than treated as standalone guarantees of equipment performance.
Performance Characteristics
Extreme-Pressure Load-Carrying Capacity
SN-CSX 462 has a specified four-ball weld load of at least 500 kgf under ASTM D2596, indicating extreme-pressure performance under standardized laboratory test conditions. This result provides a useful comparison parameter when evaluating greases for heavily loaded equipment, but it should not be interpreted as a direct measure of bearing load capacity or a guarantee of wear protection in service.
High-Temperature Capability
The grease offers a specified service range up to +200°C and a dropping point above 300°C. Its oxidation and mechanical stability characteristics support its use in demanding thermal environments. However, dropping point should not be interpreted as the maximum continuous operating temperature.
Resistance to Water Washout
This product has a specified water washout value of no more than 1% at 80°C under ASTM D1264, demonstrating strong resistance to water-induced grease removal under the stated test conditions. This characteristic is particularly relevant to steel processing and marine lubrication applications, although actual performance depends on water exposure, equipment design and operating conditions.
Corrosion and Mechanical Stability
The technical data sheet identifies corrosion resistance, oxidation stability and mechanical stability among the performance characteristics of SN-CSX 462. These properties are relevant to industrial bearings exposed to moisture, vibration and repeated mechanical working. However, the supplied documentation does not provide separate numerical test results for these characteristics, so application-specific performance should be verified where required.
Selection Guidance
SN-CSX 462 should be considered where NLGI 2 grease consistency, high-viscosity mineral base oil, heavy-load performance and water resistance match the equipment’s lubrication requirements.
Before selecting this grade, maintenance and procurement teams should verify operating speed, bearing geometry, lubricant delivery method, environmental exposure and manufacturer recommendations.
For example, a steel mill bearing exposed to water and high mechanical loading may benefit from the grease’s low water washout and high four-ball weld load values. However, the same high-viscosity base oil may not be appropriate for every high-speed bearing arrangement.
When replacing an existing grease, verify thickener compatibility and arrange appropriate changeover procedures rather than assuming different grease formulations can be mixed.
Compatibility and Limitations
The product is formulated with mineral oil and a calcium sulfonate complex thickener. Compatibility with other grease thickeners, seal materials and existing lubricants has not been established in the supplied technical documents.
SN-CSX 462 should therefore not be substituted solely based on NLGI grade or temperature rating. Equipment-specific verification is recommended, particularly for high-speed bearings, automatic lubrication systems and applications involving grease changeovers.
The MSDS specifies storage between 0°C and 50°C in tightly closed, properly labelled containers, away from direct sunlight and strong oxidizing agents. For container materials, mild steel and high-density polyethylene are recommended, while PVC is identified as unsuitable.
Compliance, Handling and Safety
The technical documentation references ASTM D445, ASTM D566, ASTM D217, ASTM D2596 and ASTM D1264 as test methods. These are testing references, not claims of equipment manufacturer approval.
The MSDS identifies this product as causing serious eye irritation under GHS hazard statement H319. Appropriate protective gloves and eye protection should be used during handling, and prolonged skin exposure should be avoided.
The product is not classified as a dangerous good for transport according to the supplied MSDS. Used grease and contaminated packaging must be managed according to applicable disposal regulations.
Industrial FAQ
What type of grease is SN-CSX 462?
It is an NLGI 2 calcium sulfonate complex industrial grease manufactured with high-viscosity mineral base oil for demanding lubrication applications.
Can it be used in steel mills?
Yes. The documented applications include work roll bearings and continuous casting machines. Final selection should reflect the equipment manufacturer’s requirements and actual operating conditions.
Is it suitable for wet environments?
The grease is intended for wet operating conditions and has a maximum water washout value of 1% under ASTM D1264 testing at 80°C for one hour.
What is the operating temperature range?
The specified operating temperature range is -20°C to +200°C. The actual allowable temperature at a lubrication point depends on the full equipment and operating conditions.
Can it be mixed with another grease?
Mixing compatibility is not established in the supplied documentation. Compatibility should be assessed before combining it with an existing lubricant.
Final Technical Summary
SN-CSX 462 is a candidate for industrial lubrication systems requiring NLGI 2 consistency, high-viscosity mineral base oil, extreme-pressure performance and resistance to water washout. Its documented characteristics support evaluation for steel mill bearings, continuous casting machinery and selected marine or offshore applications.
For industrial buyers and maintenance teams, final product selection should be based on equipment requirements, operating conditions and compatibility with existing lubrication systems. SiNDA can provide technical documentation, product availability information and quotation support for this product.
For industrial procurement across Africa and West Asia, SiNDA provides access to product information and quotation support to help buyers evaluate SN-CSX 462 against their equipment requirements.
Contact SiNDA on WhatsApp to request SN-CSX 462 technical documentation, commercial details and availability.
For direct and secure purchases with guaranteed quality, contact our experts now and benefit from free consultation.