Calcium Phenate
Calcium Phenate is a metallic detergent for grade-specific deposit-control and alkalinity requirements. Select by TBN, calcium content, carrier oil and compatibility with the complete lubricant formulation.
- Product Type
- Key Performance
- Application
- Open this page on mobile
Product Overview
Calcium phenate is a calcium-containing metallic detergent used in lubricant formulations, particularly engine oils. Commercial lubricant grades are typically oil-soluble or oil-dispersible detergent concentrates based on calcium alkylphenate chemistry. Many grades are sulfurized and may be supplied as neutral, low-based, or overbased products in a diluent oil.
Its principal role is to help control deposits and provide alkalinity for neutralizing acidic combustion and oxidation by-products. The practical outcome is improved surface cleanliness and reduced risk of corrosive attack when the detergent is balanced with dispersants, antioxidants, anti-wear agents, and other package components.
SiNDA supplies calcium phenate lubricant additives from selected international manufacturers, subject to grade availability, application requirements, destination-market regulations, and commercial conditions. The manufacturer and country of origin are confirmed for each quotation.
Operational Applications
This product can be evaluated for passenger-car motor oils, heavy-duty diesel engine oils, marine or stationary-engine lubricants, and selected industrial lubricants requiring deposit control and reserve alkalinity.
For example, in an engine oil exposed to combustion acids and elevated piston-zone temperatures, the detergent can help limit deposits while contributing to acid neutralization. However, it does not create a complete engine-oil package by itself; performance depends on the full formulation and base oil.
Use outside engine and marine lubricant formulations should be considered only where the selected supplier grade is specifically supported by technical data and application testing.
Technical Evaluation Parameters
No universal specification applies to every grade. Buyers should compare:
- Total Base Number (TBN)
- Calcium and active-matter content
- Sulfur content, where applicable
- Kinematic viscosity and density
- Flash point and carrier-oil type
- Water and sediment limits
- Storage and handling requirements
The discrete compound calcium phenoxide, also referred to as calcium diphenoxide and identified by CAS No. 5793-84-0, should not be treated as automatically equivalent to a commercial calcium alkylphenate lubricant detergent. The offered grade’s TDS and SDS must define the actual material.
Performance Characteristics
Detergency can contribute to the control of high-temperature deposits and support cleaner engine surfaces. Actual deposit and varnish performance depends on the complete formulation, base-oil solvency, oxidation control, and application conditions.
Alkaline reserve helps neutralize acidic species formed during combustion and lubricant aging, supporting control of corrosive wear.
Some overbased grades contain a colloidal calcium carbonate core stabilized by phenate surfactant in an oil medium. This structure provides additional basicity, but a higher TBN is not automatically better. Increased calcium contribution may raise sulfated ash and alter finished-oil balance.
Calcium phenate may support wear and corrosion control within an engineered package, but it is not a direct substitute for dedicated anti-wear, antioxidant, extreme-pressure, or ashless dispersant additives.
Compatibility and Limitations
Compatibility must be validated with the intended base oil and other detergents, including calcium sulfonates, magnesium detergents, or salicylates. Interaction with ashless dispersants, ZDDP, antioxidants, viscosity modifiers, and seals should also be reviewed.
Do not choose the highest-TBN grade when the formulation has a strict sulfated-ash target, aftertreatment sensitivity, or limited calcium budget.
Treat rates must be established through formulation calculations and testing. Overdosing can disturb ash level, deposit control, oxidation performance, or additive compatibility. Product effectiveness depends on the base oil, application, dosage, and balance with other additives.
Selection Guidance
Choose this product when the formulation needs metallic detergency, acid neutralization, and deposit-control support. Before requesting a quotation, define:
- Application and viscosity grade
- Base-oil group
- Target finished-oil TBN
- Sulfated ash or calcium limit
- Existing detergent and dispersant chemistry
- Required API, ACEA, OEM, marine, or industrial performance level
- Packaging, destination, and annual volume
Do not select it as a standalone answer to soot dispersion, boundary wear, oxidation, foam, or low-temperature flow. Those requirements normally need other additive chemistries or a complete package.
Compliance and Standards
Calcium phenate is a formulation component. By itself, it does not establish compliance with API, ACEA, OEM, marine, or other finished-lubricant performance requirements, nor does it determine an SAE viscosity grade. Such claims apply to the finished lubricant after the required formulation, testing, and, where applicable, licensing or approval process.
SiNDA can coordinate available TDS, SDS, certificate of analysis, packaging information, and regulatory documentation for the selected grade.
Industrial FAQ
Is Calcium phenate the same as calcium sulfonate?
No. Both are calcium-based metallic detergents, but they use different surfactant chemistry. They should not be substituted one-for-one without formulation validation.
Is a higher-TBN grade always better?
No. Higher basicity can increase acid-neutralization capacity but may also increase calcium and ash contribution.
Can it replace an ashless dispersant?
No. Ashless dispersants are specifically used to suspend soot and insoluble contaminants. Most engine oils require a balanced detergent–dispersant system.
What information is needed for an RFQ?
Provide the application, target TBN, base-oil group, detergent system, ash limit, performance specification, packaging, destination, and order volume.
Compare Magnesium Sulfonate and Overbased Calcium Sulfonate when evaluating detergent-metal balance and reserve alkalinity. Validate each grade in the complete formulation.
| Property | Product Information |
|---|---|
| Product family | Calcium alkylphenate metallic detergent; confirm sulfurized or other grade chemistry |
| Grade types | Neutral, low-base or overbased; confirm selected product |
| Function | Grade-specific deposit control and alkaline reserve |
| Applications | Qualified engine and marine lubricant formulations |
| TBN, calcium and sulfur content | Refer to selected-grade TDS and batch COA |
| Carrier and physical properties | Confirm carrier oil, viscosity, density and test conditions |
| Treat rate and compatibility | Determine from formulation targets, ash limits and performance testing |
| Packaging | Confirm available shipment options in the quotation |
| Documentation | Request current TDS, SDS and batch COA |
Select Calcium Phenate using grade-specific TBN, calcium and sulfur content, carrier oil and formulation tests. Contact SiNDA for TDS, SDS, COA, samples and quotation.
For direct and secure purchases with guaranteed quality, contact our experts now and benefit from free consultation.