SN-508 – Synthetic Gate & Plug Valve Grease and Sealant
SN-508 is an NLGI 2 synthetic valve grease and sealant developed for lubricated gate and plug valves. Formulated with an inorganic thickener, selected solid lubricants and performance additives, it is designed to provide extreme-pressure lubrication, wear and corrosion protection, and resistance to water and petroleum hydrocarbons.
With a specified operating temperature range of -25°C to +260°C, this product is formulated to help reduce valve operating torque and support sealing performance in demanding industrial services. Product suitability should be confirmed against the valve design, process medium and actual operating conditions.
Contact SiNDA via WhatsApp to request a quotation, confirm availability and discuss the technical requirements of your valve system.
- Product Type
- Key Performance
- Application
- Open this page on mobile
Product Overview
SN-508 is a specialized valve grease and sealant developed for the lubrication and sealing requirements of compatible gate and plug valves. Its formulation combines a synthetic oil base, an inorganic thickener and selected solid lubricants to support lubrication under demanding mechanical and operating conditions.
The grease is formulated to resist washout by crude oil, distillates and other petroleum hydrocarbons. Its adhesive and non-drying characteristics help maintain lubricant presence within the intended valve lubrication areas, while its torque-reduction and sealing functions support valve operation. Actual performance depends on valve construction, service conditions and correct application.
The formulation is designed to resist washout by crude oil, distillates and other petroleum hydrocarbons. Its high adhesiveness helps the lubricant remain in place, while its non-drying characteristics support lubrication in valve service.
The product is also formulated to reduce operating torque and provide sealing performance. Actual sealing effectiveness depends on valve design, seal condition, service pressure and correct application.
SN-508 is classified as an NLGI 2 grease, making it a specialized option within the broader range of industrial grease products.
Industrial Applications
Gate Valve Lubrication and Sealing
In lubricated gate valves, this product can be considered where a combined lubricant and sealant is required to manage friction and support sealing performance. Its stated torque-reduction, corrosion-protection and hydrocarbon-resistance characteristics are relevant to equipment operating in petroleum-related services. Selection should follow the valve manufacturer’s lubricant requirements.
Plug Valve Lubrication
Lubricated plug valves require a suitable compound to reduce friction at contacting surfaces and support their designed sealing function. SN-508 combines high adhesiveness, stated extreme-pressure performance and resistance to petroleum hydrocarbon washout, making it a candidate for compatible plug valve lubrication systems.
Oil, Gas and Petrochemical Services
This product is designed for lubricated valves used in hydrocarbon, LPG, aromatic and natural gas services. Its resistance to petroleum hydrocarbon washout supports its use in compatible oil, gas and petrochemical applications. Suitability should be verified based on the process fluid, valve design and operating conditions.
Chemical and Aqueous Services
The technical datasheet also identifies aqueous solutions, acids and caustics among its intended valve-service applications. However, these general application categories do not establish compatibility with every chemical formulation or concentration. Chemical compatibility should be confirmed for the specific process fluid, operating temperature, valve materials and exposure conditions before use.
High-Temperature Valve Systems
SN-508 has a specified upper operating temperature of +260°C and an inorganic thickener, with no dropping point reported under ASTM D566. These properties are relevant when evaluating the grease for elevated-temperature valve service. However, the dropping-point result alone does not establish lubricant service life, oxidation stability over extended periods or suitability for continuous operation at the maximum stated temperature.
Technical Specifications
The following properties are reported in the technical datasheet.
| Property | Test Method | Specification |
| Product Type | — | Synthetic Valve Grease and Sealant |
| Base Oil Type | — | Synthetic Oil |
| Thickener Type | — | Inorganic |
| NLGI Consistency | — | 2 |
| Penetration | ASTM D217 | 265–295 |
| Dropping Point | ASTM D566 | None |
| Four-Ball Weld Load | ASTM D2596 | ≥650 kgf |
| Fuel Resistance – Solubility Test | — | Pass |
| Fuel Resistance – Sample Deterioration | DEF STAN 91-6/4 Annex B | No Deterioration |
| Water Resistance – Sample Disintegration | DEF STAN 91-6/4 Annex B | No Deterioration |
| Water Resistance – Water Appearance | DEF STAN 91-6/4 Annex B | Clear |
| Aqueous Alcohol Resistance – Sample Disintegration | DEF STAN 91-6/4 Annex B | No Deterioration |
| Aqueous Alcohol Resistance – Liquid Appearance | DEF STAN 91-6/4 Annex B | Clear |
| Corrosion and Rust Prevention (52°C, 48 hrs) | ASTM D1743 | Pass |
| Operating Temperature Range | — | -25°C to +260°C |
| Colour | — | Black |
Additional Test Information:
The technical datasheet reports no sample deterioration following immersion in the specified fuel test fluid at 23 ± 2°C for 7 ± 0.5 hours, followed by 24 hours of air drying. The aqueous alcohol resistance test was conducted at 23 ± 2°C for 168 ± 2 hours.
Note: These results apply to the specified laboratory test conditions and do not guarantee compatibility with every process fluid.
Performance Characteristics
High-Temperature Performance
SN-508 is specified for an operating temperature range of -25°C to +260°C. Its inorganic thickener and reported ASTM D566 dropping-point result are relevant to evaluating high-temperature suitability. The published temperature range should be considered alongside operating duration, valve design, process-medium exposure and the equipment manufacturer’s lubrication requirements.
Extreme Pressure and Anti-Wear Protection
This product contains selected solid lubricants and performance additives intended to provide anti-wear and extreme-pressure properties. Its technical datasheet reports a four-ball weld load of ≥650 kgf under ASTM D2596, indicating load-carrying performance under the specified laboratory test conditions. This value is not a valve pressure rating or a measure of sealing capacity.
Torque Reduction and Sealing Support
SN-508 is designed to reduce operating torque and support sealing in lubricated gate and plug valves. The technical datasheet identifies these functions but does not report a quantified torque-reduction percentage or measured leakage rate. Accordingly, sealing effectiveness and operating torque should be verified under the specific valve and service conditions.
Resistance to Water and Hydrocarbons
This product is described in its technical datasheet as resistant to washout by crude oil, distillates and other petroleum hydrocarbons. The datasheet also reports no sample deterioration under the specified water and aqueous alcohol resistance tests. These findings support product evaluation for relevant valve applications, but they do not establish compatibility with every petroleum product, solvent or process fluid.
Oxidation Resistance and Non-Drying Properties
The technical datasheet lists oxidation resistance and non-drying behavior among the product’s performance characteristics. These are relevant considerations for valve lubricants exposed to demanding operating environments. However, no quantitative oxidation-stability test result or fixed relubrication interval is provided in the available datasheet, so maintenance planning should follow equipment requirements and actual service conditions.
Compatibility and Application Limitations
SN-508 selection should be based on the valve manufacturer’s lubricant requirements, the actual process fluid and the expected operating conditions. Although the technical datasheet identifies several industrial service categories, successful application requires confirmation of chemical compatibility, valve-material suitability and the appropriate lubrication or injection method.
Important selection considerations include:
- Valve design: Confirm that the equipment is a lubricated gate or plug valve and that an NLGI 2 synthetic valve grease is appropriate.
- Operating temperature: Check that expected service temperatures remain within the specified -25°C to +260°C range.
- Process-fluid compatibility: Evaluate the actual chemical composition, concentration and temperature of the fluid.
- Sealing requirements: Confirm compatibility with the valve’s seals, elastomers and internal materials.
- Lubrication system: Verify that the grease consistency is suitable for the equipment’s application or injection method.
The available documents do not establish compatibility with specific elastomer grades, provide maximum valve pressure ratings or certify performance against particular valve-manufacturer specifications.
This product should not be selected solely on the basis of its temperature range or four-ball weld-load value.
Handling, Storage and Safety
SN-508 is a black, semi-solid grease that is insoluble in water. According to its MSDS, the recommended storage temperature is 0°C to 50°C. Keep containers tightly closed in a cool, well-ventilated area, away from direct sunlight and strong oxidizing agents.
The MSDS reports a flash point above 200°C and an autoignition temperature above 320°C. These safety properties should not be confused with the product’s operating temperature range.
Avoid prolonged skin contact and eye exposure. Use appropriate protective gloves and eye protection. Prevent environmental contamination and dispose of used grease according to local regulations.
For detailed safety and handling instructions, refer to the MSDS.
Selection Guidance for Industrial Buyers
Selecting SN-508 for an industrial valve application begins with confirming the equipment manufacturer’s lubricant requirements. Buyers should verify that the valve is designed for lubricant or sealant injection and that the specified grease consistency, process-fluid compatibility and operating temperature range are suitable for the installation.
To support technical product selection and quotation, provide the valve manufacturer and model, valve type, operating temperature and pressure, process medium, application or injection method, and any relevant OEM lubricant specification. SiNDA can review the supplied requirements against the available technical documentation and identify where additional compatibility confirmation is needed.
Frequently Asked Questions
Is SN-508 a grease or a valve sealant?
This product is both a synthetic valve grease and a sealant. It is designed to lubricate compatible gate and plug valves while supporting their sealing function.
What is the operating temperature range of this product?
The specified operating temperature range is -25°C to +260°C. Actual suitability depends on the valve design, process conditions and operating requirements.
Can it be used in oil and gas applications?
Yes. It is suitable for lubricated valves in hydrocarbon, LPG and natural gas services, subject to application compatibility.
Is this product resistant to water and petroleum hydrocarbons?
Yes. The product is described as resistant to water and hydrocarbon washout, with supporting water-resistance test results reported in the technical datasheet.
What is the NLGI grade of this product?
This product has an NLGI consistency grade of 2, with a reported penetration range of 265–295 under ASTM D217.
Can SN-508 be used in acid or caustic services?
The technical datasheet includes acids and caustics among its listed services. However, compatibility with the specific chemical, concentration, temperature and valve materials must be confirmed before use.
Final Summary
SN-508 is an NLGI 2 synthetic gate and plug valve grease and sealant designed for industrial applications requiring lubrication, sealing support and resistance to petroleum hydrocarbons. Its specified operating temperature range of -25°C to +260°C and published technical characteristics make it a candidate for demanding valve-service conditions, subject to application compatibility.
For technical specifications, product availability and quotations, contact SiNDA Oil Trading L.L.C via WhatsApp.
For direct and secure purchases with guaranteed quality, contact our experts now and benefit from free consultation.