INDUSTRIAL GEAR OILS
Specify industrial gear oils by gearbox design, load, operating temperature and required lubricant chemistry before comparing grade options.
- Open this page on mobile
Industrial gear oils — Product Routes
We supply industrial gear oils for enquiries involving compatible enclosed gear drives and related lubrication systems. The listed range includes grades 68, 100, 150, 320, 460 and 680, each with a separate product route.
Start with the gearbox requirement, then review the matching product. Examples include Gear Oil 150 and Gear Oil 320. A missing grade in this collection should be treated as a separate enquiry, rather than replaced automatically with the next available number.
Our industrial lubricants range covers the wider plant requirement. Food-machinery gear applications with incidental-contact criteria require the separate Gear H1 assessment.
Applications and Performance Requirements
Enclosed industrial gearboxes can differ in tooth geometry, sliding conditions, loading, speed and lubrication method. These differences influence viscosity, additive requirements and base-fluid selection.
Review load-carrying performance, wear protection, oxidation control, water separation and foam behaviour where relevant to the gearbox. The required balance should come from the machine and performance specification, not from a generic heavy-duty claim.
For UAE facilities, provide operating oil temperature, service hours and shock-loading information. Include environmental exposure such as water ingress or dust, along with the actual maintenance findings.
Gearbox Selection Guide
| Requirement | Information to provide | Selection consequence |
|---|---|---|
| Gear design | Helical, bevel, worm or other specified design | Defines contact and material requirements |
| Operating duty | Speed, load, shock and oil temperature | Supports viscosity and performance selection |
| Lubricant specification | OEM category and required grade | Establishes the acceptance criteria |
| Fluid chemistry | Existing mineral, PAO, PAG or other oil | Defines conversion and compatibility checks |
| Materials | Seals, coatings and yellow-metal components | Helps identify formulation restrictions |
Where a load-carrying test is specified, compare results from the same method and conditions. A single test result is not a universal guarantee against every form of gear damage.
Gear-oil comparison example
Two ISO-grade-matched offers use different base-fluid chemistries. Before replacing the existing oil, check the gearbox specification, material compatibility and changeover instructions. A lower purchase price does not settle whether the alternative can be mixed with the residual fluid or used with the installed seals.
Compatibility and Limitations
Do not use an automotive axle-oil designation as a substitute for an industrial gear specification. SAE and ISO viscosity systems and their associated performance categories need to be interpreted in the correct application context.
Worm gears or systems containing copper alloys can need a different fluid assessment from other enclosed drives. Active-sulfur chemistry and material compatibility should be checked for the exact formulation.
PAG, PAO and mineral products should not be treated as automatically mixable. Assess seals, coatings, residual fluid and changeover requirements before conversion. Open gears may require a dedicated lubricant rather than an enclosed-gear oil.
Technical Documents and UAE Supply
Request the selected grade's TDS and SDS. If DIN, ISO, OEM or application-test requirements are specified, verify them against the exact formulation and distinguish approvals from general suitability statements.
Send the gearbox manufacturer and model, gear design, required viscosity, current lubricant, operating temperature, load pattern, quantity and destination. Identify whether the order concerns a new fill, replenishment or a supplier change.
We use that brief to narrow the product route and confirm commercial conditions. A quotation should identify both the grade and the relevant performance requirement, so a matching number alone cannot be mistaken for technical equivalence.
Frequently Asked Questions
Can I replace a gear oil with any product of the same ISO grade?
No. Chemistry, load-carrying performance, materials and OEM requirements also need to match.
Can enclosed-gear oil be used on open gears?
Only where the exact lubricant and equipment requirement support that use; many open gears require a dedicated product.
Request a Technical Quotation
Discuss the equipment, required grade, operating duty and order quantity with SiNDA to identify the relevant product route and request a Dubai, UAE or international supply quotation. Contact us on WhatsApp: +971 56 154 4177.