Industrial Lubricant Supplier in Dubai, UAE
As an industrial lubricant supplier in Dubai, we help maintenance teams and technical buyers source hydraulic and gear oils against equipment requirements, with direct access to product information and quotations.
Request a quotation on WhatsApp — send your application, required grade, quantity and delivery location.
- Lead time
- Supply modes
- Coverage
UAE & GCC shipping
Our Product Range
We supply industrial lubricants for plant maintenance, manufacturing machinery and equipment distribution. Our published range includes hydraulic oils from ISO VG 10 to ISO VG 460 and industrial gear oils in grades including ISO VG 68, 100, 150, 320, 460 and 680.
These families serve different lubrication duties. Hydraulic circuits require a fluid matched to power transmission, pump lubrication and control requirements. Enclosed gearboxes require an oil matched to gear design, speed, loading and the specified performance level.
Hydraulic, Gear and Other Industrial Oils
Start with the system identified in the equipment manual:
Hydraulic oils: for hydraulic power units, presses, machine tools and mobile equipment specifying the selected fluid category and viscosity.
Industrial gear oils: for enclosed drives and reduction gearboxes specifying the selected viscosity and documented gear-oil performance.
Grease lubrication: explore our greases for industrial applications where bearings, joints or other components require grease.
For compressors, turbines and other specialised oil systems, send the exact application and specification for a supply enquiry. A hydraulic or gear oil should not be selected for another system solely because its viscosity matches.
Featured Products
Use these product pages to begin a specification review:
ISO VG 22 hydraulic oil: a mineral-based hydraulic fluid for systems specifying this viscosity. Review low-viscosity requirements, operating conditions and the required performance category.
Hydraulic Oil ISO VG 46: for hydraulic equipment specifying ISO VG 46. Check pump requirements and the permitted viscosity range at startup and operating temperature.
Gear Oil 320: an ISO VG 320 industrial gear lubricant for enclosed gearboxes specifying this grade. Review the required performance category and gearbox, metal and seal compatibility.
The product page identifies the grade and application route. Use the current formulation-specific technical data sheet for measured properties and performance statements.
Expert Technical Support
Send the machine make and model, lubrication point, OEM requirement, current oil and operating conditions. This gives our team a defined basis for discussing product selection and the documents needed for your enquiry.
For a replacement request, the objective is a candidate product supported by a specification comparison. The review should identify the matching requirements, any differences and any information still needed before changeover.
For example, an existing oil labelled “46” does not establish whether the machine requires a conventional mineral hydraulic fluid, a different performance category or a specialised fluid. Include the full product name and equipment manual extract.
Industrial Lubricant Selection by Application
Use this matrix to connect the machine requirement with the appropriate product route. ISO VG and performance requirements come from the equipment documentation; the table does not assign a universal grade.
| System | Lubricant family | Selection input | Product route |
|---|---|---|---|
| Hydraulic power unit or press | Hydraulic oil | OEM fluid category, ISO VG, pump type, operating temperature and cleanliness requirement | Hydraulic Oil ISO VG 46 when specified; send the pump requirement |
| Precision hydraulic circuit | Hydraulic oil | Specified low-viscosity grade, valve requirements and startup/operating viscosity limits | Review ISO VG 22 hydraulic oil when specified |
| Enclosed industrial gearbox | Industrial gear oil | OEM grade, gear design, speed, load, required performance and material compatibility | Review Gear Oil 320 when specified |
| Grease-lubricated bearing or joint | Industrial grease | NLGI grade, base-oil viscosity, temperature, speed, load and existing thickener | Use the separate industrial grease range |
| Compressor or other specialised system | Application-specific oil | Machine model, OEM specification, current fluid chemistry and service conditions | Send the application and specification |
Dubai’s ambient conditions make actual equipment temperature relevant. Record reservoir or gearbox oil temperature and startup conditions. Follow the manufacturer’s viscosity guidance rather than increasing the grade simply because the installation is in the UAE.
Industrial Lubricant Supplier in Dubai and the UAE
Our Dubai office gives industrial buyers a direct contact for product and commercial enquiries.
SiNDA Oil Trading L.L.C.
Al Huda Building, 2nd Floor, Office 207, Omar Bin Al Khattab St, Naif, Deira, Dubai, UAE.
WhatsApp: +971 56 154 4177
Email: info@sindaoil.ae
For a plant requirement in Dubai or another emirate, specify the delivery address, required quantity and requested delivery date. These details allow the supply requirement to be assessed against the selected product.
For product enquiries and office contact details, contact the SiNDA sales team.
Reliable Supply Chain
A clear purchase specification supports repeat ordering. Record the agreed product name, viscosity grade, performance requirement, pack size and quantity on the purchase order.
Published packaging for our Hydraulic Oil 22 and Hydraulic Oil 46 includes 1 L, 4 L, 5 L, 20 L, 25 L and drum formats. Specify your preferred format when requesting a quotation.
Ask for confirmation of availability, minimum order quantity, lead time, delivery arrangements and required documents for the selected order. For recurring demand, include estimated consumption and the replenishment schedule.
International buyers should also state the destination country, delivery point or port, requested shipping terms and import documentation requirements. This provides a practical basis for an export enquiry without assuming the same arrangements for every destination.
Technical Documents and Replacement Enquiries
Use the following checklist when replacing an existing lubricant:
| Enquiry field | Information to send |
|---|---|
| Current oil | Full brand, product name, viscosity grade and current TDS |
| Machine | Manufacturer, model, component and reservoir or gearbox capacity |
| OEM requirement | Required fluid category, viscosity range and any mandatory approval |
| Operating conditions | Startup and operating temperatures, load, duty cycle and service history |
| Contamination or water | Known ingress, filtration details and available oil-analysis results |
| Quantity and destination | Initial fill or top-up volume, pack preference and delivery location |
Request the current TDS for technical properties and stated performance, and the SDS for handling, storage and safety information. Where procurement requires a COA, state the batch-document requirement in the enquiry and confirm availability before ordering.
Compare properties using the same test methods, units and temperatures. A typical-property value does not establish a batch acceptance limit.
Before switching products, check base-fluid and additive compatibility, seal requirements and the equipment manufacturer’s changeover procedure. Establish whether draining, flushing or other preparation is required. Keep the agreed comparison and changeover instructions in the maintenance record.
Frequently Asked Questions
What information is needed to replace an industrial oil?
Send the current product name and TDS, machine details, OEM lubricant requirement, operating conditions, quantity and destination. Include oil-analysis findings or known water contamination when available.
Can ISO VG alone identify an equivalent lubricant?
No. ISO VG identifies a viscosity class referenced to 40°C. It does not establish performance category, base-fluid chemistry, additive compatibility or OEM approval. Compare these requirements separately before selecting a replacement.
Do you supply hydraulic and gear oils separately?
Yes. Our industrial range lists hydraulic oils and industrial gear oils as separate product families. Select the family first, then match the specified grade and performance requirement.
What documents can technical procurement request?
Request the current TDS and SDS for the proposed product. Identify any batch COA, OEM approval evidence or other mandatory document at the enquiry stage so its availability and relevance can be checked.