SN-LCX EP

SN-LCX EP is a mineral oil-based lithium calcium complex grease developed for industrial and automotive applications involving elevated temperatures and heavy operating loads. Available in NLGI 1, 2 and 3 consistency grades, it offers high-temperature performance, oxidation resistance, corrosion protection and mechanical stability for demanding lubrication requirements.

Request technical information, product availability and a quotation through WhatsApp.

Lithium Calcium Grease
High-Temperature Stability
Industrial & Automotive
QR Code
Scan the QR to continue on your phone

Product Overview

SN-LCX EP is a multipurpose grease formulated with mineral base oil and a lithium calcium complex thickener. It is recommended for heavy-duty bearings, industrial machinery and automotive equipment operating under demanding load and temperature conditions.

SN-LCX EP has a specified operating temperature range of −20°C to +180°C and a dropping point of 300°C. The dropping point is a measured grease property and should not be interpreted as the maximum operating temperature. Suitability for continuous or intermittent high-temperature service should be evaluated according to actual equipment conditions, lubrication requirements and manufacturer recommendations.

Supplied by SiNDA, this product is available in three consistency grades to support different equipment and grease application requirements.

Key Product Features

  • High-Temperature Performance: Specified operating range up to +180°C.
  • Mechanical Stability: Formulated for demanding lubrication applications.
  • Oxidation and Corrosion Resistance: Performance characteristics identified in the technical datasheet.

Industrial Applications

SN-LCX EP is recommended for general industrial and automotive applications where heavier loads or higher temperatures require a more demanding grease selection.

Heavy-Duty and Construction Equipment

Typical applications include loaders, excavators, cranes and stone crushers. These machines contain lubricated components subjected to repeated loading and demanding operating environments.

Grease consistency, relubrication practices and equipment manufacturer requirements should be considered before selecting a grade.

Bearings and Material Handling Equipment

The product is suitable for evaluation in heavy-duty bearings, conveyors and pellet mills. These applications may involve sustained mechanical stress or elevated operating temperatures.

The appropriate grade should be selected according to bearing design, operating speed, lubrication method and the equipment manufacturer’s recommendations.

Automotive and Process Machinery

This product is also recommended for car and truck wheel bearings and machinery used in pulp and paper production.

For automotive bearing applications, confirm the required grease specification and compatibility with the existing lubricant before use.

Technical Specifications

Property Test Method NLGI 1 NLGI 2 NLGI 3
Base Oil Type — Mineral Oil Mineral Oil Mineral Oil
Base Oil Viscosity at 40°C ASTM D445 220 mm²/s 220 mm²/s 220 mm²/s
Thickener Type — Lithium Calcium Complex Lithium Calcium Complex Lithium Calcium Complex
Dropping Point ASTM D566 300°C 300°C 300°C
NLGI Consistency — 1 2 3
Worked Penetration (60 Double Strokes), 0.1 mm ASTM D217 310–340 265–295 220–250
Operating Temperature Range — −20°C to +180°C −20°C to +180°C −20°C to +180°C
Colour — Light Brown Light Brown Light Brown

The specifications above are reproduced from the supplied technical datasheet.

Performance Characteristics

Temperature Resistance and Oxidation Stability

The lithium calcium complex formulation is intended for applications requiring high-temperature performance and oxidation resistance. These characteristics are relevant when equipment operates under sustained thermal stress.

The specified +180°C operating limit should be checked against actual component temperatures and operating conditions rather than relying on ambient temperature alone.

Corrosion Protection and Service Durability

SN-LCX EP is formulated to provide corrosion protection and support extended grease service life in industrial and automotive lubrication applications. Actual performance and relubrication intervals depend on operating temperature, mechanical loads, contamination, bearing design and maintenance conditions.

Although long service life is identified as a product feature in the technical datasheet, no quantified service-life results or universal relubrication intervals are provided.

Mechanical Stability

Mechanical stability is an important consideration in equipment exposed to repeated movement and loading.

This product is designed to provide this characteristic, although its datasheet does not report a quantified roll-stability or prolonged-worked-penetration result.

Selecting the Appropriate NLGI Grade

The three grades share the same published base oil viscosity, lithium calcium complex thickener, dropping point and operating temperature range. Their primary documented difference is grease consistency, expressed through NLGI classification and worked penetration values.

  • SN-LCX EP 1: NLGI 1 consistency with a worked penetration range of 310–340 (0.1 mm). Evaluate for equipment specifying a softer grease consistency.
  • SN-LCX EP 2: NLGI 2 consistency with a worked penetration range of 265–295 (0.1 mm). Evaluate for equipment requiring an NLGI 2 grease.
  • SN-LCX EP 3: NLGI 3 consistency with a worked penetration range of 220–250 (0.1 mm). Evaluate for equipment specifying a firmer grease consistency.

Grade selection should follow the equipment manufacturer’s recommendations and consider operating temperature, bearing speed, lubrication delivery method and any required performance specifications. Matching the NLGI grade alone does not establish complete lubricant suitability.

Compatibility and Application Limitations

Before changing grease products, confirm compatibility with the grease already present in the equipment. The supplied documentation does not include grease-mixing compatibility results.

Although this product carries the EP designation, the available technical datasheet does not provide quantified extreme-pressure or anti-wear performance results, such as four-ball weld load, four-ball wear scar diameter or other relevant test values. Buyers requiring specific load-carrying or wear-protection performance should request additional test data and confirm compliance with their equipment specifications before selecting the product.

Do not assume suitability for food-grade applications or equipment requiring specific OEM approvals without additional documentation.

Handling, Storage and Safety

SN-LCX EP is a light-brown, semi-solid product with negligible water solubility. The safety document specifies a storage temperature of 0°C to 50°C.

Keep containers tightly closed in a cool, ventilated location, protected from direct sunlight and extreme temperatures.

Mild steel and high-density polyethylene are identified as recommended container materials; PVC is listed as unsuitable for containers or linings.

Avoid prolonged or repeated skin contact and protect the eyes from accidental exposure, as the safety datasheet identifies serious eye irritation as a potential hazard. Prevent the product from entering drains, soil or waterways. Use appropriate personal protective equipment and follow safe handling procedures, particularly when working with pressurized lubrication systems. Consult the MSDS for detailed first-aid, exposure control, spill response and disposal instructions.

Industrial FAQ

What type of grease is SN-LCX EP?

It is a mineral oil-based multipurpose lithium calcium complex grease for industrial and automotive applications.

Which NLGI grades are available?

It is available in NLGI 1, 2 and 3.

What is its operating temperature range?

The specified range is −20°C to +180°C across all three grades.

Is it suitable for heavy-duty equipment?

Its listed applications include excavators, loaders, cranes, crushers and industrial bearings. Final selection depends on the equipment’s lubrication requirements.

Show full description

Final Technical Summary

SN-LCX EP is a multipurpose lithium calcium complex grease available in NLGI 1, 2 and 3 for industrial and automotive lubrication applications. With a mineral base oil viscosity of 220 mm²/s at 40°C and a specified operating temperature range of −20°C to +180°C, it provides documented technical characteristics for initial product evaluation.

Before ordering, buyers should confirm the required grease consistency, operating conditions, lubricant compatibility and any application-specific test or approval requirements.

Contact SiNDA to request technical information, confirm product availability and obtain a commercial quotation for your industrial lubrication requirements.

For direct and secure purchases with guaranteed quality, contact our experts now and benefit from free consultation.