SN-305 – Extremely High Viscosity Open Gear Lubricant
SN-305 is an extremely high-viscosity, semi-synthetic open gear lubricant developed for heavily loaded industrial gear drives. Available in 550 and 1000 grades, it combines high load-carrying capacity, strong adhesion and a performance additive system designed to protect gear surfaces against wear, pitting and scuffing. Its water-resistant and sprayable characteristics make it suitable for consideration in applications such as rotary kiln and ball mill open gear drives.
Request a quotation from SiNDA via WhatsApp. Share your required grade, equipment application and purchasing requirements for technical and commercial assistance.
- Product Type
- Key Performance
- Application
- Open this page on mobile
Product Overview
SN-305 is formulated with extremely high-viscosity semi-synthetic base oil and performance additives for the lubrication of exposed industrial gear drives. Its high viscosity and adhesive properties help maintain a lubricant film on gear surfaces subjected to substantial mechanical loads.
Open gear drives expose lubricant films to repeated tooth engagement and demanding mechanical loads. This product is formulated for these operating conditions, combining extremely high viscosity with strong adhesion and water resistance to support lubricant retention on exposed gear surfaces. Its sprayable characteristics also allow the product to be considered for compatible open-gear lubrication systems.
According to the product technical datasheet, SN-305 is formulated without asphalt, solvents or solid lubricants. For detailed composition and safe-handling information, refer to the product Material Safety Data Sheet (MSDS).
Two viscosity grades are available, allowing engineers and maintenance teams to select a grade according to equipment requirements and operating conditions.
Industrial Applications
Rotary Kiln Open Gear Drives
Rotary kiln drive systems operate with heavily loaded gear contacts and require a lubricant capable of adhering to exposed surfaces. This product provides high load-carrying capability and resistance to wear, pitting and scuffing for these demanding lubrication conditions.
Its specified operating temperature range of 0°C to +120°C should be considered when reviewing the gear operating environment.
Ball Mill Gear Drives
Ball mills use large gear drives that experience substantial mechanical loading during operation. SN-305 is formulated for open gear lubrication in these systems, where adhesive lubricant coverage and protection against surface damage are important.
Its sprayable characteristics also make it relevant to equipment fitted with suitable lubricant application systems.
Wire Rope Lubrication
Wire rope lubrication is also listed among the typical applications in the technical datasheet. The lubricant’s high adhesion and water-resistant characteristics may support lubricant retention on exposed rope surfaces.
Before use, suitability should be confirmed against the wire rope manufacturer’s lubrication requirements, the rope’s construction, operating environment and specified application procedure. Inclusion in the product’s typical applications does not establish universal compatibility with every wire rope system.
Technical Specifications
SN-305 is available in two extremely high-viscosity grades. The following values are taken from the product technical datasheet.
| Property | Test Method | Grade 550 | Grade 1000 |
| Base Oil Type | — | Semi-Synthetic | Semi-Synthetic |
| Kinematic Viscosity at 100°C | ASTM D445 | 550 cSt | 1,000 cSt |
| Kinematic Viscosity at 40°C | ASTM D445 | 17,000 cSt | 25,000 cSt |
| Four-Ball Weld Load | ASTM D2596 | ≥800 kgf | ≥800 kgf |
| Four-Ball Wear Test | ASTM D2266 | <0.55 mm | <0.55 mm |
| FZG Scuffing Load Stage | DIN 51354 | >12 | >12 |
| Flash Point | ISO 2592 | ≥200°C | ≥200°C |
| Operating Temperature Range | — | 0°C to +120°C | 0°C to +120°C |
| Colour | Visual | Brown | Brown |
The principal documented difference between 550 and 1000 is their kinematic viscosity at 40°C and 100°C. Grade1000 has higher reported viscosity values at both temperatures, while the two grades share the same specified operating temperature range and reported four-ball and FZG performance limits. Grade selection should be based on equipment manufacturer recommendations, operating conditions and lubricant application system requirements.
Key Performance Characteristics
High Load-Carrying Capacity
The technical datasheet reports a four-ball weld load of at least 800 kgf under ASTM D2596 for both viscosity grades. This standardized test provides a reference for evaluating extreme-pressure load-carrying characteristics under defined laboratory conditions.
The datasheet also specifies an FZG scuffing load stage greater than 12 under DIN 51354. Together, these reported values support the product’s positioning for heavily loaded lubrication applications, although actual gear performance depends on equipment design, operating loads and lubrication conditions.
Protection Against Wear, Pitting and Scuffing
SN-305 is formulated to help protect open gear surfaces against wear, pitting and scuffing, as described in the product technical datasheet. Its extremely high-viscosity semi-synthetic base oil and performance additives are intended to support lubrication under heavily loaded operating conditions.
The datasheet reports a four-ball wear scar diameter below 0.55 mm under ASTM D2266. This value provides a standardized indication of anti-wear performance under the specified laboratory test conditions. It should not be interpreted as a direct measurement of gear pitting resistance, a guaranteed wear rate or a prediction of equipment service life.
Adhesion, Water Resistance and Sprayability
The product combines strong adhesion with water-resistant characteristics, helping lubricant remain on exposed equipment surfaces.
This product is also described as sprayable, allowing consideration for suitable open gear lubrication systems. Application equipment should be checked for compatibility with the selected viscosity grade.
Choosing Between 550 and 1000
Selecting the correct grade requires more than choosing the highest viscosity.
Grade 550 has a kinematic viscosity of 17,000 cSt at 40°C and 550 cSt at 100°C. It is the lower-viscosity option within the SN-305 range.
Grade 1000 has a kinematic viscosity of 25,000 cSt at 40°C and 1,000 cSt at 100°C. It provides a higher viscosity level for equipment where that specification is appropriate.
Before selecting a grade, review the equipment manufacturer’s recommendations, gear operating temperature, lubrication method and the capability of the lubricant delivery system.
For example, a centralized spray system must be capable of delivering the chosen lubricant consistently. Higher viscosity alone does not confirm better lubrication or equipment compatibility.
Compatibility, Operating Limits and Storage
During handling and application, avoid prolonged or repeated skin contact and prevent exposure to lubricant mists. Wear suitable protective gloves and use safety glasses or face protection where splashing is possible. The MSDS identifies serious eye irritation as a potential hazard. High-pressure injection injuries require immediate medical attention, even when no visible wound or symptoms are present. Follow the equipment manufacturer’s safety procedures and the product MSDS when using pressurized lubrication systems.
The MSDS recommends storing this product at 0°C to 50°C, with containers tightly closed in a cool, well-ventilated location away from direct sunlight and temperature extremes.
Mild steel and high-density polyethylene are identified as recommended containers or lining materials. PVC is listed as unsuitable for containers or linings.
Avoid contact with strong oxidizing agents. Personnel should also avoid prolonged skin contact and use appropriate eye protection where splashing may occur.
SN-305 should not be discharged into drains, surface water or groundwater. Used lubricant and contaminated materials must be handled according to applicable local disposal regulations.
Test Methods and Technical Documentation
Technical data includes recognized lubricant testing methods:
- ASTM D445: Kinematic viscosity at 40°C and 100°C.
- ASTM D2596: Four-ball weld load testing.
- ASTM D2266: Four-ball wear testing.
- DIN 51354: FZG scuffing load stage.
- ISO 2592: Flash point determination.
The published test methods provide technical reference points for comparing the two grades and evaluating their suitability for specific lubrication requirements. Laboratory results should be interpreted alongside equipment specifications, operating conditions and lubricant application procedures. For composition, handling, storage and safety precautions, consult the accompanying MSDS.
Frequently Asked Questions
What is SN-305 used for?
It is an extremely high-viscosity lubricant developed primarily for open gear drives. Its documented applications include rotary kilns, ball mills and wire ropes.
What is the difference between 550 and 1000?
The grades differ in viscosity. At 100°C, 550 has a viscosity of 550 cSt, while 1000 has a viscosity of 1,000 cSt. Both share the same stated operating temperature range and specified four-ball and FZG performance values.
Is it suitable for spray lubrication?
According to its technical datasheet, this product is formulated without asphalt or solid lubricants. The datasheet also states that the product is solvent-free. For detailed composition information, consult the MSDS.
What is the maximum operating temperature of this product?
The specified upper operating temperature is +120°C. The reported flash point of at least 200°C does not increase this operating limit.
Does this product contain asphalt or solid lubricants?
No. According to the technical datasheet, It is free from asphalt, heavy metals, solvents and solid lubricants.
Final Technical Summary
SN-305 is an extremely high-viscosity, semi-synthetic open gear lubricant developed for heavily loaded industrial applications, including rotary kilns and ball mills. Available in SN-305/550 and SN-305/1000 grades, it combines strong adhesion, water resistance, sprayability and reported extreme-pressure and anti-wear test performance. Both grades have a specified operating temperature range of 0°C to +120°C.
For grade selection and purchasing inquiries, contact SiNDA Oil Trading LLC with your equipment specifications, operating conditions, preferred viscosity grade and required quantity to discuss technical suitability and quotation details.
For direct and secure purchases with guaranteed quality, contact our experts now and benefit from free consultation.