SN-409 – Metal-Free Heavy-Duty Anti-Seize Compound
SN-409 is a heavy-duty, metal-free anti-seize compound formulated with graphite, mineral oil, and an inorganic thickener for industrial threaded connections and mechanical assemblies. Designed to help prevent seizing, galling, and corrosion, this NLGI 1 assembly paste supports reliable installation and easier disassembly of components exposed to heat, pressure, and vibration.
Contact SiNDA via WhatsApp to request specifications, confirm availability, and obtain a quotation for your industrial requirements.
- Product Type
- Key Performance
- Application
- Open this page on mobile
Product Overview
SN-409 is a specialized graphite-containing anti-seize paste designed to protect metal-contact surfaces during assembly and subsequent operation.
Its formulation combines hydrotreated heavy naphthenic mineral oil, a bentonite-based inorganic thickener, and graphite. The inorganic thickening system is characterized by no reported dropping point under ASTM D2265, while graphite provides solid-lubricant properties for demanding contact conditions.
The product is specified as NLGI Grade 1, with a worked penetration of 310–340 (0.1 mm) according to ASTM D217. Its relatively soft consistency supports controlled application to threads and assembly surfaces.
According to the product Technical Data Sheet, This product is formulated to help reduce friction, resist heat-related seizure, and facilitate the disassembly of threaded components after prolonged service.
Unlike conventional multipurpose grease, this product is primarily intended for anti-seize protection and assembly lubrication rather than general-purpose bearing lubrication.
Industrial Applications
Bolts, Nuts, and Studs
SN-409 can be applied to suitable threaded fasteners to reduce friction during assembly and help prevent thread seizure.
Its graphite-containing formulation supports anti-seize protection in threaded assemblies exposed to mechanical loading, vibration, and prolonged service, helping facilitate subsequent disassembly.
For critical bolted joints, follow the equipment manufacturer’s tightening specifications, as applying an anti-seize compound can alter the relationship between tightening torque and bolt preload. The supplied TDS does not specify a universal torque correction factor.
Exhaust Systems and High-Temperature Assemblies
Exhaust-related threaded components can be exposed to repeated heating and cooling, which may make subsequent disassembly difficult.
This product is identified in its TDS for exhaust system applications and is formulated to help resist heat-related seizure.
Application suitability must consider actual temperature exposure, duration, and the behavior of the complete compound under operating conditions.
Brake Assemblies
The TDS lists brake assemblies among the typical applications of SN-409. Use should be limited to appropriate threaded or metal-contact assembly points where an anti-seize compound is permitted by the equipment manufacturer. This product must not be applied to brake discs, pads, friction linings, or other surfaces where contamination could impair braking performance.
Industrial Threaded Connections
SN-409 can support the assembly and disassembly of compatible threaded connections where protection against galling, corrosion, and seizure is required.
The TDS identifies galvanic corrosion protection as an intended benefit of this product in assemblies involving dissimilar metals. However, compatibility should be assessed for the specific metal combination and service environment, particularly where moisture or conductive contact may influence corrosion behavior. The supplied documentation does not provide application-specific galvanic corrosion test results.
However, application-specific compatibility and any required torque correction factors should be confirmed before use.
Key Performance Characteristics
Graphite-Based Anti-Seize Protection
Graphite acts as a solid lubricant within the formulation, supporting lubrication at metal-contact interfaces.
This characteristic is relevant when conventional liquid-film lubrication alone may be insufficient during assembly or disassembly.
Non-Melting Inorganic Thickener
SN-409 contains a bentonite-based inorganic thickening system. Its TDS lists no dropping point under ASTM D2265, consistent with a non-melting thickener rather than a conventional soap-thickened structure. This characteristic should not be interpreted as evidence that the complete mineral-oil-based formulation retains unchanged lubrication performance at all temperatures. High-temperature suitability depends on the intended operating conditions.
Reduced Friction During Assembly
The product is formulated to lower friction and facilitate the installation of threaded components.
In practical terms, this can help reduce resistance during assembly, although actual tightening torque must be established for the specific connection.
Resistance to Seizing and Galling
This product is designed to help protect threaded metal surfaces against seizure, galling, rust, and corrosion.
These properties are relevant for maintenance operations where components must remain serviceable after exposure to demanding conditions.
Technical Specifications
| Property | Test Method / Source | Reported Value |
| Product Type | TDS | Metal-Free Heavy-Duty Anti-Seize Compound |
| Base Oil Type | TDS | Mineral Oil |
| Thickener Type | TDS | Inorganic |
| Identified Thickener | MSDS | Bentonite |
| Solid Lubricant | MSDS | Graphite |
| NLGI Consistency | TDS | Grade 1 |
| Worked Penetration | ASTM D217 | 310–340 (0.1 mm) |
| Dropping Point | ASTM D2265 | None Reported |
| Operating Temperature Range | TDS | −30°C to +1315°C |
| Appearance | TDS | Grey-Black |
| Physical Form | MSDS | Paste |
| Flash Point | MSDS | >200°C |
| Water Solubility | MSDS | Negligible |
Temperature Clarification: The TDS reports an operating temperature range of −30°C to +1315°C. However, continuous operation at 1315°C is not verified by the supplied documentation. High-temperature suitability requires application-specific confirmation.
Application Instructions
The product Technical Data Sheet specifies a straightforward application procedure:
- Clean the intended application surface before use.
- Apply a thin, uniform film by brushing or wiping onto the clean surface.
- Do not use thinner.
The compound should be applied only to surfaces and connections for which anti-seize lubrication is appropriate.
For torque-critical assemblies, follow the equipment manufacturer’s tightening procedure and obtain connection-specific friction data where required.
Compatibility and Selection Considerations
SN-409 should be selected according to the materials, operating temperature, mechanical loads, and assembly requirements of the intended application. Its graphite content and reported anti-seize properties do not establish compatibility with every metal combination, while negligible water solubility should not be interpreted as verified water-washout resistance. For critical threaded connections or applications requiring specific friction coefficients, anti-galling performance, load-carrying capacity, or compatibility data, request supporting technical documentation before approval.
Storage, Handling, and Safety
According to the supplied MSDS, this product should be stored in properly labelled, tightly closed containers in a cool, well-ventilated area at 0°C to 50°C. Avoid direct sunlight, excessive storage temperatures, and contact with strong oxidizing agents.
During handling, avoid prolonged or repeated skin contact and use suitable protective gloves. Wear appropriate eye protection, particularly where splashing may occur, as the MSDS identifies a risk of serious eye irritation. Minimize environmental release and dispose of used material in accordance with applicable regulations.
Refer to the current Safety Data Sheet for detailed handling, first-aid, storage, and disposal requirements.
Why Choose SiNDA?
SiNDA Oil Trading L.L.C, based in Dubai, UAE, offers this product for industrial procurement teams, maintenance contractors, and lubricant distributors serving markets across Africa and West Asia.
When evaluating SN-409 for a specific application, buyers can contact SiNDA to request available technical documentation, discuss product requirements, confirm supply availability, and obtain a commercial quotation. Providing the intended application, required quantity, and destination market can help streamline the quotation process.
Frequently Asked Questions
Is SN-409 a grease or an anti-seize compound?
This product is classified in its TDS as a metal-free heavy-duty anti-seize compound. It has a grease-like, semi-solid consistency, but its principal documented purpose is assembly lubrication and anti-seize protection.
Does this product contain graphite?
Yes. The MSDS identifies graphite as a component of the formulation, alongside hydrotreated heavy naphthenic mineral oil and bentonite.
What is the NLGI grade of this product?
This product has an NLGI consistency grade of 1, with a worked penetration of 310–340 (0.1 mm) under ASTM D217.
Can it be used at 1315°C?
The TDS lists a maximum service temperature of 1315°C, but continuous operation at this temperature is unverified. Confirm suitability for the intended application.
Can it be used on threaded fasteners?
Yes. Bolts, nuts, studs, and threaded connections are among its documented applications, subject to material compatibility and assembly requirements.
Final Technical Summary
SN-409 is a graphite-containing, metal-free heavy-duty anti-seize compound developed for threaded fasteners and selected mechanical assemblies exposed to demanding service conditions. Its mineral-oil base, bentonite thickener, and NLGI 1 consistency support assembly lubrication and protection against seizure, galling, and corrosion. Product selection should account for material compatibility, temperature exposure, and equipment-specific tightening requirements.
To request technical documentation, confirm availability, or obtain a quotation, contact SiNDA via WhatsApp.
For direct and secure purchases with guaranteed quality, contact our experts now and benefit from free consultation.