SN-BHT 462 – High-Temperature Bentonite Grease NLGI 2

SN-BHT 462 is a high-viscosity, bentonite-thickened industrial grease formulated for high-temperature and heavily loaded bearing applications. Its non-soap formulation combines a mineral base oil with a viscosity of 500 mm²/s at 40°C and an inorganic thickener. The grease is designed to provide consistency retention, oxidation resistance, and boundary lubrication, with a specified operating temperature range of −20°C to +200°C.

Contact SiNDA via WhatsApp to request a quotation, review technical specifications, and discuss SN-BHT 462 grease availability for industrial operations in Africa and West Asia.

Bentonite Grease
High-Temp Protection
Kiln & Furnace Bearings
QR Code
Scan the QR to continue on your phone

Product Overview

SN-BHT 462 is an NLGI 2 high-temperature grease formulated for industrial equipment operating under elevated temperatures and substantial mechanical loads. The product uses a high-viscosity mineral base oil thickened with bentonite clay, producing a non-soap grease intended to retain its consistency as operating temperatures increase.

The technical datasheet lists the dropping point of this product as “None,” with ASTM D566 identified as the test method. Its inorganic bentonite thickener is intended to maintain grease consistency at elevated temperatures, making the formulation relevant to selected high-temperature lubrication applications. However, the absence of a reported dropping point does not eliminate thermal operating limits or guarantee long-term lubricant performance. The specified upper operating temperature remains +200°C, and suitability should be confirmed against actual equipment conditions.

The base oil has a kinematic viscosity of 500 mm²/s at 40°C, making SN-BHT 462 relevant to lubrication points where a high-viscosity oil film is required. Combined with its reported load-carrying capacity and boundary lubrication characteristics, the formulation is intended to support bearing protection under demanding industrial operating conditions.

Industrial Applications

Kiln Car Wheel Bearings

Kiln car wheel bearings may experience elevated temperatures and substantial mechanical loading during industrial thermal processes. This product is recommended in its technical datasheet for these lubrication points, where consistency retention and a high-viscosity lubricating film are important selection considerations.

Furnace Door Bearings

Furnace door bearings operate near heat sources and may encounter repeated temperature variations. The bentonite thickener helps the grease maintain its structure under rising temperatures, while the high-viscosity mineral oil provides lubrication to bearing contact surfaces.

Heat Exchange Motor Bearings

The technical datasheet identifies heat exchange motor bearings among the typical applications of SN-BHT 462. For these installations, grease selection should consider actual bearing temperature, rotational speed, load, and the equipment manufacturer’s lubrication requirements. The product’s high base oil viscosity means suitability should be verified for the specific motor and bearing arrangement before use.

Oven Conveyor Bearings

Oven conveyor systems require reliable bearing lubrication in environments where high temperatures can affect conventional grease consistency. This product is intended for these applications where the equipment’s operating conditions are compatible with its NLGI 2 consistency, high base-oil viscosity, and specified temperature limits.

Performance Characteristics

High-Temperature Consistency Retention

The inorganic bentonite thickener is designed to resist changes in grease consistency at elevated temperatures. This supports the retention of a semi-solid lubricant structure in suitable high-temperature bearing applications.

Load-Carrying Capacity

The technical datasheet reports a four-ball weld load of at least 250 kgf under ASTM D2596. This provides a documented extreme-pressure performance indicator for evaluating the grease in loaded contacts, although actual bearing suitability must also account for speed, geometry, and operating conditions.

High-Viscosity Lubricating Film

A base oil viscosity of 500 mm²/s at 40°C supports consideration of the product for heavily loaded lubrication points requiring relatively high oil viscosity. Selection must account for the potential effects of high viscosity on lubricant movement, starting torque, and operating temperature.

Oxidation Resistance and Mechanical Stability

The formulation is described as having high oxidation resistance and good mechanical stability. These characteristics are intended to support grease performance during thermal and mechanical exposure, but service life and relubrication intervals require equipment-specific validation.

Water Resistance and Boundary Lubrication

The technical datasheet identifies water resistance and good boundary lubrication among the performance characteristics of SN-BHT 462. These properties support consideration of the grease for applications involving incidental moisture exposure or lubricant film conditions where boundary lubrication is important. However, quantitative water-resistance test results are not provided in the supplied datasheet, so applications involving continuous water exposure or washout risk require additional evaluation.

Compatibility and Limitations

The suitability of this product should be evaluated against the equipment manufacturer’s lubrication requirements, including bearing type, speed, load, operating temperature, and lubrication method.

Mixing with existing grease: Compatibility with other thickener systems has not been established in the supplied documents. When changing from another grease, avoid assuming compatibility and determine whether cleaning or complete replacement is required.

High-speed applications: The 500 cSt base oil viscosity makes operating speed an important selection factor. High-speed bearing applications should not be approved solely on the basis of temperature resistance.

Temperature limits: The specified operating temperature range is −20°C to +200°C. The absence of a conventional dropping point must not be interpreted as authorization to use the grease above +200°C.

Chemical exposure: The MSDS identifies strong oxidizing agents as materials to avoid. Compatibility with specific process chemicals should be assessed before use.

When Not to Use

SN-BHT 462 should not be selected without further technical evaluation for bearings requiring low-viscosity lubricants, equipment operating outside the stated temperature range, or applications where grease compatibility has not been established.

For lubrication points involving unusually high rotational speeds, centralized delivery systems, or stringent starting-torque requirements, confirm whether the NLGI 2 consistency and 500 cSt base oil viscosity are appropriate before specifying the product.

Selection Guidance for Industrial Buyers

When evaluating SN-BHT 462 for a new installation or grease replacement program, identify the actual bearing temperature rather than relying exclusively on nearby process temperatures. Kilns, furnaces, and conveyors may expose bearings to significantly different conditions depending on insulation, mounting location, and operating cycles.

Next, establish the bearing load and rotational speed, together with the existing lubricant specification. These factors influence whether a high-viscosity bentonite grease is an appropriate alternative.

For procurement teams comparing industrial grease products, useful technical information includes the equipment model, bearing type, rotational speed, operating load, actual bearing temperature, current lubricant, lubrication method, expected service conditions, and required supply quantity.

Handling and Storage

According to the product MSDS, SN-BHT 462 should be stored in tightly closed, properly labelled containers in a cool, well-ventilated area. The stated storage temperature range is 0°C to 50°C.

Avoid prolonged skin contact and contact with eyes, and use appropriate protective equipment based on the workplace risk assessment. Prevent release into drains and the environment. For detailed instructions concerning handling, accidental release, first aid, and disposal, consult the current product MSDS.

Industrial FAQ

What type of grease is SN-BHT 462?

This product is a non-soap, bentonite-thickened industrial grease with NLGI 2 consistency and a high-viscosity mineral base oil.

What is the operating temperature range of this product?

The product technical datasheet specifies an operating temperature range of −20°C to +200°C. Suitability at the temperature extremes depends on the specific application.

Is it suitable for kiln and furnace bearings?

The technical datasheet lists kiln car wheel bearings and furnace door bearings as typical applications. Final selection should account for actual bearing temperature, load, speed, and equipment specifications.

Can this product be mixed with lithium grease?

Mixing compatibility with lithium-thickened grease is not established in the supplied technical documents. Compatibility should be verified before mixing or changing lubricants.

Show full description

Final Technical Summary

SN-BHT 462 is an NLGI 2, bentonite-thickened grease intended for selected high-temperature industrial bearing applications. Its mineral base oil viscosity of 500 mm²/s at 40°C, inorganic thickener, and reported four-ball weld load of at least 250 kgf under ASTM D2596 support its evaluation for kiln car wheel bearings, furnace door bearings, heat exchange motor bearings, and oven conveyor bearings. Final selection should account for bearing speed, load, operating temperature, and equipment requirements.

For product specifications, supply enquiries, and quotation requests, contact SiNDA through WhatsApp with your application requirements.

For direct and secure purchases with guaranteed quality, contact our experts now and benefit from free consultation.